Haier WQP12-EBM Installation Manual

Summary of WQP12-EBM

  • Page 1

    Domestic dishwasher wqp12-ebm code: 0120501504 dw12-ebm gb installation diagram filter wiring box power indicator power switch 3(1) ig water level switch 2 3 1 p1 220-240v~ 50hz f * n l mr 4b 2(1) 4(2) 1(2) ls is 3b door switch overflow switch inlet valve drain pump dispensor td motor t50? Heater so...

  • Page 2

    .2. .1. Notice carefully read the instructions contained in this manual,as they provide importion which is essential to safe and proper installation, use and maintenace of the appliance. This appliance complies with following eec directives: -73/23/eec of 19/02/73(low voltage)and subsequent modifica...

  • Page 3

    .3. .4. S a l t salt the hardness of the water varies from place to place. If hard water is used in the dishwasher,desposits will form on the dishes utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loadi...

  • Page 4

    .5. .6. Loading the dishwasher before placing the dishes in the dishwasher, remove the large food particle to the prevent the filter from becoming clogged,which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allow...

  • Page 5

    .7. .8. - it is important to try and run the dishwasher when it is fully loaded to save on enery.In order to prevent odors from forming and food from caking onto the dishes,you can run the hold cycle. - choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and ut...

  • Page 6

    .9. .10. Cleaning and special maintenance filter assembly for best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.For this reason ,it is a good idea to remove the larger ...