Hogtunes 5x7REV Installation Manual

Summary of 5x7REV

  • Page 1

    5x7rev/rg installation manual 5x7rev/rg installation manual includes: (1) hogtunes nca 70.2 amplifier • (1) pair hogtunes 572.2-aa speakers • (1) road glide adaptor kit for use on all 1998 and newer fltr road glide models with factory or after market radio *** not for use on cvo model bikes with fact...

  • Page 2

    5x7rev/rg installation instructions step #1: remove the main power and ground wire from the battery. Remove your outer fairing/headlamp assembly, and set it aside. Refer to a service manual if you need help with either of these. Note: a towel on the front fender can help prevent scratches or “dings”...

  • Page 3

    Amplifier wire color codes yellow/black: clutch side amplifier input from factory radio brown/black: clutch side amplifier output to front speaker green/black: brake side amplifier input from factory radio blue/black: brake side amplifier output to front speaker orange: remote turn on lead red: 12v posi...

  • Page 4

    System upgrade #1 this system is an easy way to add rear speakers to your bike if you’ve added a king tour-pak®. Hogtunes rear speaker pods come with a wire harness set up for quick detach tour paks that will plug right into the expansion port on the amp. Important: since the radio power will be use...

  • Page 5

    9 system upgrade #3 this system uses a hogtunes nca-40.4 160 watt 4 channel amp and a nca 70.2 for the ultimate in power! As shown below, the typical system would have 2 channels of the 40.4 power the 5x7’s while the other 2 channels power the rear speakers. The bypass out of 40.4 is used to send mu...

  • Page 6: Ride Alert

    Hogtunes products will play much louder than the original equipment, which can be a distraction to the rider and/or passenger. Please use caution when adjusting, or playing your stereo at high volume, especially in traffic. You are a valued customer so please: ride alert arrive alive! Www.Hogtunes.Co...