Nca 450-rm 2 0 0 w a t t 4 - c h a n n e l a m p l i f i e r installation manual nca 450-rm 2 0 0 w a t t 4 - c h a n n e l a m p l i f i e r f o r u s e o n r u s h m o r e p l at f o r m b i k e s installation manual.
Thank you for choosing the hogtunes nca 450-rm amplifier for 2014+ rushmore platform bikes. Since positive word of mouth is the best way to grow our business, we want your new system to work as well as it was designed to. If you have any questions or concerns, we are here to help. Important: the nca...
2 installation instructions step #1: remove the seat and both wires (+ and -) from the battery. Step #2: remove your outer fairing/headlamp assembly and set aside. Refer to a service manual if you need help with this. Note: placing a towel or something similar on the front fender can help prevent “d...
3 step #5: sit the supplied silver plate on top of the radio as shown in fig 1.2. Locate and install one of the supplied “star” washers on each factory screw and re-install the screw/washer through the silver plate, through the factory black plate and into the top of the radio. Locate the main power...
4 •youwillseea“fader/nofader”switchonthesideoftheamp. In this option you will put the amp to the “no fader” setting. Also on the side of the amp is a switch to adjust the volume of the rear channels (compare to the volume of the front speakers) in most cases, you will leave this adjustment at the +3...
Routing the power and long rear speaker harness for ultra stock location speakers step #1: the power/ground harness and supplied long rear harness for ultras will pass together under the inner fairing where the main wire harness passes through on the brake side of the bike. Loosen the tank’s “chrome...
Step #3: attach the amp’s red wire to the positive (+) battery terminal and the amp’s black wire to the negative (-) battery terminal. The factory battery wiresarealsore-installedatthispoint.Whenattachingthepowerand ground wires, it is always a good practice to do the negative first. Whenthepositive...
7 adjusting your system-please read! In order to make your new system perform as good as it was designed, please take a minute to understand and follow these tips: 1) set your “automatic volume control” (avc) to 3 bars. After extensive on-road testing, we found that this avc position works and sound...
Harley-davidson, electra glide, road glide, street glide, ultra classic, tri glide, cvo, screamin eagle and tour-pak® are trademarks, and/or registered trademarks of harley-davidson, inc., milwaukee, wisconsin, usa, and if used or implied are for reference only. There is no affiliation between harle...
Hogtunes products will play much louder than the original equipment, which can be a distraction to the rider and/or passenger. Please use caution when adjusting or playing your stereo at high volume, especially in traffic. You are a valued customer so please: ride alert arrive alive! Www.Hogtunes.Co...
