Holis 4CH Quick Start Manual - page 5
Manual is about: HD 4 Channel and 8 Channel
of
9
5
1.
Loosen the screws of the upper
cover and side panel.
2. Fix four screws in the HDD.
3.
Place the HDD in accordance with
the four holes in the bottom.
4.
Turn the device upside down
and then turn the screws in
firmly.
5.
Connect the HDD cable and
power cable.
6. Put the cover in accordance with the
clip and then place the upper cover
back. Secure the screws in the rear
panel and the side panel.
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to push the
clip first and then put down.