Holland Electronics HE900E/CONV-SS Instruction Manual - page 7
6
1) Microwave power inquiring:
In the process of microwave cooking, press " " button, it can display the current microwave power.
After three seconds, it will turn back to the former state.
2) Hot-air convection temperature inquiring:
In the process of hot-air convection cooking, press " " button, it can display the current temperature.
After three seconds, it will turn back to the former state.
3) Combination cooking inquiring:
In the process of combination cooking, press " " or " " button, it can display the current
combination type.
After three seconds, it will turn back to the former state.
***Protection Function
1. Protection function for temperature sensor open and short circuit: when the sensor is open , stop working.
The digital displays "E-1" and all indicator lights of temperat-ure flash. When the sensor is short , the digital
displays"E-2" and all indicator lights of temperature flash.
2. Protection function for high-temperature of stove cavity: in the process of cooking, when the center
temperature of the stove is higher than 190°, stop microwave or cooking. The fan starts working. When the
center temperature of the stove is lower than 170°, microwave or cooking is recovered, and the end of
cooking is controlled by time.
3. In the process of hot-air convection working, when the preheating time is longer than 30 minutes and the
temperature is still not reached, stop working,display "E-3".
7.Cleaning
Be sure to disconnect the oven from the power supply.
1. Clean the inside of the oven after use with a slightly damp cloth.
2. Clean the accessories in the usual way in soapy water.
3. The door frame and seal and neighbouring parts must be cleaned carefully with a damp cloth when they are
dirty.
10. State Inquiring