HOLLY & MARTIN CK702300TX Assembly Instructions - page 3
of
5
Figure 1
Note: The assembly process will
begin with the table upside down.
Attach Legs (D) to Top Frame (A)
with Bolts (2) through Spring
Washers (3) and Flat Washers (4).
Tighten Bolts (2) using
Allen wrench (1).
Figure 2
Attach Left Supports (B) to
assembled unit from Figure 1 with
Bolts (2) through Spring Washers (3)
and Flat Washers (4).
Tighten Bolts (2) using Allen Wrench
(1).
Console Table
Assembly Instructions
Page 3