HOLLY & MARTIN HZ881000TX Assembly Instruction Manual - page 5
of
8
Figure 3
Attach right leg (F) to bottom
rail (G) and pre-assembled
unit from Figure 2 using bolts
(3 ) & flat washers (7).
Tighten all bolts using Allen
wrench (5).
Figure 4
Attach Wine holder back
frame (M) and wine holder
front frame (N) to
pre-assembled unit from
Figure 3 using bolta (3).
Tighten bolts (3) using Allen
wrench (5).
Attach casters with locks (1)
& casters without locks (2) to
the bottom of pre-assembled
unit from Figure 3.
Tighten casters with crescent
wrench (6).
Page 5