Holman CO1701 Instruction Manual

Manual is about: Electronic 2 DIAL Tap timer

Summary of CO1701

  • Page 1

    Instruction manual co1701 electronic 2 dial tap timer co1701 2 dial tap timer.Indd 1 14/11/12 4:34 pm.

  • Page 2: Table Of Contents

    Table of contents technical data technical data................................................................. P1 glossary........................................................................... P2 applications & safety instructions................................ P3 connecting to the tap & ope...

  • Page 3: Table Of Contents

    Table of contents technical data 1 tap connection: 20mm bsp female hose connection: 12mm hose snap-on or 20mm bsp male water pressures: max. 8 bar 800kpa water temperature: max. 40ºc irrigation medium: clean water batteries: 2 x 1.5v aaa alkaline batteries (not supplied) co1701 2 dial tap timer.Indd...

  • Page 4: Glossary

    Glossary 2 applications & safety instructions 1. Universal tap adaptor 2. Tap connection 3. Union nut 4. Control dials 5. Battery compartment 6. Clear screw-on cover 7. Snap-on hose connection 1 2 3 4 5 6 7 this electronic 2 dial tap timer is ideal for watering small garden areas, pots & flower beds...

  • Page 5: Glossary

    Glossary 3 applications & safety instructions 5. Battery compartment 6. Clear screw-on cover 7. Snap-on hose connection this electronic 2 dial tap timer is ideal for watering small garden areas, pots & flower beds, fitting directly onto your garden tap. Safety instructions for reasons of long life r...

  • Page 6: Tap Timer Diagram

    Connecting to the tap & operation modes tap timer diagram 4 for connection you need a water tap with a 20mm or 25mm thread. 1. Unscrew the union nut (3) to enable the water tap connection (2) to move freely. 2. Screw the tap timer firmly onto the water tap by the tap connection. Turn the unit to fac...

  • Page 7: Tap Timer Diagram

    Connecting to the tap & operation modes tap timer diagram 5 for connection you need a water tap with a 20mm or 25mm thread. 1. Unscrew the union nut (3) to enable the water tap connection (2) to move freely. 2. Screw the tap timer firmly onto the water tap by the tap connection. Turn the unit to fac...

  • Page 8: Automatic Programming

    6 manual operation: (on / off) automatic programming on: turn the “how long” dial to “on”. The unit will water until this dial is turned to “off”. Note: there is a 10 second delay. Off: the “off” position on the “how long” dial will stop an automatic or manual watering cycle. Install the 2 x 1.5v aa...

  • Page 9: Automatic Programming

    7 manual operation: (on / off) automatic programming on: turn the “how long” dial to “on”. The unit will water until this dial is turned to “off”. Note: there is a 10 second delay. Off: the “off” position on the “how long” dial will stop an automatic or manual watering cycle. Install the 2 x 1.5v aa...

  • Page 10: Notes Page

    8 notes page notes page co1701 2 dial tap timer.Indd 10 14/11/12 4:34 pm.

  • Page 11: Notes Page

    9 notes page notes page co1701 2 dial tap timer.Indd 11 14/11/12 4:34 pm.

  • Page 12: Battery / Faults / Warranty

    Battery / faults / warranty warranty: we will honour all statutory guarantees that this product is of acceptable quality. (including that it is fit for purpose) holman industries: 47 walters drive, osborne park, wa 6017. Ph: +61 8 9204 1011 www.Holmanindustries.Com.Au battery: if battery power becom...