HOLOPHONE H4 SuperMINI User Manual - page 18
H4-SuperMINI User Guide
Rising Sun Productions Ltd.
page 14
Zoom Indicator
LED display indicating whether Audio Zoom
has been activated. (See Zoom Button
below.)
Two-color LED Monitor LED display indicating the sound pressure for
each microphone element. The display
provides the operator with an intuitive
indication of relative levels.
green: the channel is active
red:
clipping
Mic Gain
Controls the input level of all six (5.1)
microphone elements in the H4 SuperMINI
Head.
This should be adjusted only after setting the
input level on the camera or external storage
device.
Zoom Button
Audio Zoom Button increases the forward
bias of microphone pickup pattern to match
the video zoom for a close-up camera shot.
There are two zoom buttons – one on the
back of the Control Unit and one on the left
side (operator’s viewpoint).
When you press either of the zoom buttons,
the decibel levels of the mic inputs change as
follows:
Center:
plus 6 db
R & L:
plus 3 db
SR & SL:
minus 3 db
-12 db PAD LED
LED indicates that the -12 db PAD has been
activated (see below).
External Center LED
LED indicates that an external center
microphone is in use.
External Center Switch Hold down this switch for one second to
activate an External Center Microphone that
has been attached to the Control Unit via the
XLR input on the right side (see External
Center Microphone Input above.) The
External Center LED illuminates.
To switch from an External Center
Microphone back to the built-in SuperMINI
center microphone, hold down the switch for
one second. The LED is extinguished.
back zoom button
left side zoom
button