Holux GPSlim 236B Quick Manual - Holux
HOLUX
Instructions for First Use
1. Installing the Battery
2. Charge the Battery
3. Switch on the Power
4. Bluetooth
Link
Note about Bluetooth connection
When you power on the
, you need to wait 6 seconds for Bluetooth to self-test
before a connection is established. Wait until the Bluetooth light starts to flash ( once every
second). Then a Bluetooth- link can be established between a PDA and the
.
z
U
sing the supplied rechargeable lithium-ion
battery, install it as shown in the adjacent diagram,
and replace casing.
z
To ensure safe operation, only use battery as
instructed.
z
Connect the supplied power cord to the mini USB
socket, and attach to your computer (laptop), PDA, or
car cigarette lighter.
z
This power cord is for battery charging only. It does not
provide any data transmission function.
z
Always ensure that you have inserted the end of the
power cord into the correct socket when connecting
the mini USB connector.
z
Slide the power switch to the ON position.
z
To operate link with a PDA (Personal Digital
Assistant): Activate the Bluetooth Manager, select
Search, and link.
z
Select the HOLUX
icon and choose SPP
slave to establish the Bluetooth link.
z
Refer to the “Software Installation” section for details if
you have any problem installing the Bluetooth link.