Holux GR-230 User Manual - 6. Optional

HOLUX 

GR-230 Bluetooth GPS Receiver Manual 

16

6. Optional 

accessories 

GR-230 has many accessories to satisfy customers’ requirement see table 2. After 

using GR-230 with the following accessories, it can transmit message with PDA, Note 

Book easily. 

Table 2 

Item Description 

Note 

GR230-A1 

1.5M RS232 data cable   

GR230-A2 

1.5M USB data cable 

GR230-A3 

Output convert to GM-210’s PDA Car charger adaptor 

GR230-B1 

2M 28db MCX connector active antenna 

7. Driver Installation  

You can use any GR230 accessories data cable without installing driver except 

GR230-A2 USB cable. The following is the steps of installation GR230-A2 USB 

cable. 

7.1 System Requirement  

CPU: IBM, Pentium, or other compatible PC.     

Memory: above 16 MB 

System: Windows 98/Me/2000/XP 

7.2 Installation  

I.  Copy entire GM230 USB folder from CD to hard disk. 

II.  Connect GR-230-A2 USB connector to computer without GR-230 GPS receiver. 

While the computer automatically starts the installation program, please direct 

the driver to the GR230 USB folder. 

7.3 Important 

Verify the COM port to start using your own navigation software.   

I. Click 

menu, select  →  , then enter→     

II. After 

entering 

, and select. 

III. Select 

. 

IV. Find the (COM & LPT)> and check the Virtual COM Port, which 

was created by the USB driver.