Holux Impulse 8050 User Manual

Manual is about: OHR Smart Band

Summary of Impulse 8050

  • Page 1

    2+56pduwedqg ,psxovh user manual v1.0

  • Page 3: Safety Instructions

    Holux ohr smart band i mpulse 8050 1 safety instructions • read this manual carefully before use to ensure safe operation of the device. • the device is not a medical device and only used for the measurement in normal exercises. Make sure the device is worn in the correct measuring position. If you ...

  • Page 4

    Holux ohr smart band impulse 8050 2 waterproof function; - do not rinse the device directly under a faucet to avoid affecting or damaging the waterproof function. • do not remove or replace the battery. Only well trained service personnel are allowed to disassemble/install the internal components. N...

  • Page 5: Warranty Statement

    Holux ohr smart band impulse 8050 3 warranty statement • this warranty applies to parts and services that are manufactured and sold through holux. The warranty length is one year from date of purchase (starting from the date on the sales receipt). Under normal user operation, holux provides free rep...

  • Page 6

    Holux ohr smart band impulse 8050 4 4. The content of this user manual is subject to change without prior notice. Please contact us if you have any question or notice any errors in descriptions in the user manual..

  • Page 7: Copyright Information

    Holux ohr smart band impulse 8050 5 copyright information no part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any mean, without the express written pe...

  • Page 8: Statement

    Holux ohr smart band impulse 8050 6 federal communications commission (fcc) statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful inte...

  • Page 9: Rf Exposure Warning

    Holux ohr smart band impulse 8050 7 authority to operate this equipment. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including ...

  • Page 10: Content

    Holux ohr smart band impulse 8050 8 content product introduction .................................................... 9 product overview ........................................................ 10 key function ............................................................... 11 accessories ..............

  • Page 11: Product Introduction

    Holux ohr smart band impulse 8050 9 product introduction thank you for purchasing holux heart-rate smartband impulse 8050. Impulse 8050 is a smartband designed for people who are in pursuit of a healthy lifestyle and convenience in exercising. It has the most advanced integrated physical monitoring ...

  • Page 12: Product Overview

    Holux ohr smart band impulse 8050 10 product overview front view rear view screen function switch key charging p ort ohr.

  • Page 13: Key Function

    Holux ohr smart band impulse 8050 11 key function key operation and function function switch key switch function: press the key for 1 second to switch time/ step/ heart-rate/ fatigue function. Enable/ disable function: in heart-rate and fatigue function page, press and hold the key for 3 seconds to ...

  • Page 14

    Holux ohr smart band impulse 8050 12 accessories check the box for the following supplied accessories. If any is missing, contact your supplier immediately. Impulse 8050 charging cradle quick guide.

  • Page 15: Charging The Battery

    Holux ohr smart band impulse 8050 13 charging the battery before using your impulse 8050 for the first time, you need to charge it for approximately 2 hours. As following figure, clip the impulse 8050 into the charging cradle, ensuring that the metal terminals are in contact. Using the ac charger or...

  • Page 16: Connecting To A Pc

    Holux ohr smart band impulse 8050 14 using the ac charger (optional) connect the cradle to the optional ac adapter, then insert the ac adapter into a power outlet. Connecting to a pc insert the cradle's usb cable into a free usb port on your pc..

  • Page 17: Wear The Smartband

    Holux ohr smart band impulse 8050 15 wear the smartband when using impulse 8050, wear your device on the wrist below the wrist bone as shown in the following figure. To measure the heart rate correctly, make sure the strap fits snugly around the wrist to ensure the wristband is pressed against the s...

  • Page 18: How To Use Impulse 8050

    Holux ohr smart band impulse 8050 16 how to use impulse 8050 make sure the battery is fully charged (charging time: about 2 hours) before using the product to ensure normal operation of the system. When using the device for the first time, long press the [function switch key] for 6 seconds to enable...

  • Page 19: Menu Function

    Holux ohr smart band impulse 8050 17 menu function the time page appears once you start to use the device. Press the [function switch key] to switch function pages. The following table lists the available functions. Main screen time function: display current time. ※ time calibration: using the bluet...

  • Page 20

    Holux ohr smart band impulse 8050 18 function is enabled, the icon will be displayed as “solid”. → ※ after enabling the heart-rate measurement function, please first remain stationary for about 20-30 seconds. A big and small heart symbol (beating continuously) will be displayed on the screen. When t...

  • Page 21

    Holux ohr smart band impulse 8050 19 after 2 minutes of detection, the device will disable detection automatically. Please verify the position where the smartband is worn and perform the measurement again. Then, wait until the smartband detects the heartbeat before starting normal activities. → fati...

  • Page 22

    Holux ohr smart band impulse 8050 20 bluetooth connection and battery status: display the bluetooth connection and power status. ※ when pairing with bluetooth, the screen will display a link symbol. ※ power level display: power level 65~100%; power level 35~65%; power level 10~35%; power level messa...

  • Page 23: Legends

    Holux ohr smart band impulse 8050 21 charging, short press [function switch key] is not work. After charging is completed, the screen will show battery status page. Legends insufficient memory space: indicates the memory usage is more than 90%. Short press [function switch key] to close the page. Th...

  • Page 24: App Installation

    Holux ohr smart band impulse 8050 22 app installation using the bluetooth connection, this device can be used with the impulse app installed on your smartphone. The impulse app can be used to display related activity and training records. Step 1: on your smartphone, go to the google play store, sear...

  • Page 25: Register And Login

    Holux ohr smart band impulse 8050 23 register and login → → device pairing and binding (make sure the bluetooth functions on both the smartphone and impulse 8050 are enabled) → → ※ if you do not want to bind to a device, select “ignore and next”..

  • Page 26: Basic Data Setting

    Holux ohr smart band impulse 8050 24 basic data setting → → → → → you can start using the impulse app after completing the settings..

  • Page 27

    Holux ohr smart band impulse 8050 25 remove device pairing and binding the device information under the “setup” function can be used to remove device binding. → → → →.

  • Page 28: Do Not Drop The Unit

    Holux ohr smart band impulse 8050 26 normal care and maintenance to ensure the unit’s normal operation and extended life span, please note the following while using and storing: • do not drop the unit if violently impacted or shocked, serious damage may be caused. • avoid sudden temperature changes ...

  • Page 29: Storage

    Holux ohr smart band impulse 8050 27 please do not disassemble the product, this may void the warranty and damage the unit. • storage when the product is not being used for a long period, store the device in a cool and dry place. For long-term storage, keeping the unit in a dry box is recommended. P...

  • Page 30: Specification

    Holux ohr smart band impulse 8050 28 specification processor low power 32bit processor memory 4mb for activity log display 0.5” oled screen sensor optical heart rate (ohr) sensor g-sensor bluetooth 4.0 low energy (ble) battery rechargeable li-ion time mode: 11 days (disable heart-rate measurement fu...