Holzmann UWS3 User Manual - page 13
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Strana 13
Nástrojová bruska UWS3
1 TO USERS
1. Please check the machine and its accessories according to the packing list.
2. Do read through the manual before operating the machine.
3. Be sure to install and test the machine according to the instructions.
4. Read through the manual to learn about its performance, operation requirements,
and maintenance.If you have any questions about it, please contact the company.
2
APPLICATION
The tool grinding machine is the necessary machine to be equipped with the engraving milling
machine. It is applicable to grind and carve the end mill, graver and pins of various shape and
angle, which is used on engraving milling machine and engraving and marking machine. In addi-
tion it has many accessories, which could be used to sharpen various cutters, such as turning
tools, milling cutters and drilling bits. The machine has beautiful outlook, advanced structure and
powerful functions. It has been widely used in industrial production.
3 TECHNICAL DATA
Grinding wheel
100x50x20mm
Grinding speed
5000RPM
Collet capacity
3-16mm
Taper angle
0-180°
Negative angle
0-25°
Relief angle
0-45°
The longitudinal displacement of cutter holder
140mm
The longitudinal displacement of micro adjustment of the cutter holder
18mm
The longitudinal displacement of micro adjustment of the main spindle
6mm
Motorpower
0,5HP
Voltage
400V
Weight (net/gross)
46/52kg
Dimensions of Principal Machine
450×350×340mm
Package Dimensions
550×450×470mm