Home Automation 13R00-4 Owner's Manual

Manual is about: ELECTRONIC COMMUNICATING THERMOSTAT

Summary of 13R00-4

  • Page 1

    O m n i s t a t electronic communicating thermostat owner's manual rc-101 heat pump real time pricing system 2 stage heat / 1 stage cool document number 13r00-4 january, 1997 auto mode hold prog fan day cool : p omnistat.

  • Page 2

    Copyright © 1997 home automation, inc. All rights reserved.

  • Page 3: Contents

    Contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 about heat pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 operation . . . . . . . . . . . . . . . . ....

  • Page 4

    This thermostat is listed by underwriter's laboratories and ul canada. This thermostat has been tested and found to comply with the requirements of the european union for electromagnetic interference, electromagnetic immunity and safety under the applicable emi and low voltage directives and standar...

  • Page 5: Introduction

    Introduction thank you for purchasing your new rc-101 heat pump electronic communicating thermostat. Your thermostat will provide you with comfort, convenience, and energy savings for years to come. We hope that you take a few moments to become familiar with all of the features of this fine product ...

  • Page 6

    About heat pumps... A heat pump is a mechanical refrigeration system that operates in two modes, heating and cooling. In cooling mode, the heat pump takes indoor heat and pumps it outside, just like a standard air conditioner. In heating mode, the process is reversed: the heat pump takes outside hea...

  • Page 7

    Energy efficient control using the programmable or remote control features of your thermostat, you can save energy costs by setting back the thermostat during unoccupied times. This reduces the energy loss from indoors to outdoors. In the past, it has been said that heat pumps should not be set back...

  • Page 8: Operation

    Operation to take advantage of all the benefits and features offered by your thermostat, we recommend that you start by becoming familiar with its operation. Auto 4 mode hold 2 prog 3 fan 5 1 day cool : p 6 7 omnistat 8 9 1- display the display is used to show current time, temperature, outdoor temp...

  • Page 9

    3- prog press the prog (programming) key to set the current time and day (hours, minutes, day of week), and to program the temperature time schedules for the morn , day , eve , and nite periods. 4- mode press the mode key to set the thermostat mode to off, heat, cool, auto, or em heat. In off mode, ...

  • Page 10

    6- down arrow ( ∨ ) press the down arrow key to lower the desired temperature. 7- up arrow ( ∧ ) press the up arrow key to raise the desired temperature. 8- aux heat indicator the aux heat indicator (green) glows when the auxiliary heat is on. 9- check indicator the check indicator (red) may be used...

  • Page 11: Display

    Display the following icons will be displayed during normal operation: 1- temperature display shows the current temperature, desired temperature, or heating and cooling settings. 2- time display shows the current time of day. 3- desired desired is displayed when the temperature display shows the des...

  • Page 12: Cool

    5- the top is displayed when the heating or cooling system is running. The bottom is displayed when the auxiliary heat is on. 6- cool cool is displayed when the system is in cool mode. 7- auto auto is displayed when in automatic changeover mode. 8- heat heat is displayed when the system is in heat m...

  • Page 13: Hold

    13- hold hold is displayed when the system is in hold mode. Filter reminder your thermostat logs the amount of time your heating and cooling system has been running and gives you a reminder when it's time to replace your filter. " f i l t " will be displayed every four seconds in the place of the ti...

  • Page 14: Real Time Pricing System

    Real time pricing system your thermostat may be configured to adjust its temperature settings in response to changes in the cost of energy. Using this feature, you can take advantage of your energy provider's rate structure without sacrificing your comfort. The thermostat can make adjustments for 4 ...

  • Page 15

    Setting the current time and day to set or change the current time and day, press and release the prog key. The hour will blink. 1. Use the arrow keys ( ∧ - ∨ ) to change the hour. 2. Press the prog key to advance to minutes. 3. Use the arrow keys ( ∧ - ∨ ) to change minutes. 4. Press the prog key t...

  • Page 16: Programming

    Programming your thermostat may be programmed to adjust the heating and cooling settings up to 4 times per day ( morn , day , eve , nite ). You can setup a temperature time schedule for weekdays, saturday, and sunday. To enter programming mode, press the prog key 4 times. When in programming mode: 1...

  • Page 17

    1. Use the arrow keys to change the variance for the mid rate. 2. Press the prog key to advance to the hi rate. Use the arrow keys to change the variance for the hi rate. 3. Repeat step 2 for the crit (critical) rate. (typical settings for variance are: mid : 1 , hi : 3 , crit : 6 ) setting time sch...

  • Page 18

    2. Press the prog key to advance to the next item. 3. Use the arrow keys ( ∧ - ∨ ) to change the desired cool setting. 4. Press the prog key to advance to the next item. 5. Use the arrow keys ( ∧ - ∨ ) to change the desired heat setting. 6. Press the prog key to advance to the next period. Repeat st...

  • Page 19: System Mode

    System mode your thermostat can be connected to an automation system or personal computer. With network software, the remote system can send commands to the thermostat to change mode, cool setting, heat setting, status of fan and hold, and other items. "remote" will be displayed when a command is se...

  • Page 20: Time Schedules

    Time schedules the table below shows the time schedules that are currently set into your thermostat. There is a blank table at the bottom that can be used to plan changes to the current schedule. Weekdays saturdays sundays morn 6:00 am 8:00 am 8:00 am cool 78 78 78 heat 70 70 70 day 8:00 am cool 85 ...

  • Page 21: Cool

    Cool heat.

  • Page 22: Two Year Limited Warranty

    Two year limited warranty home automation, inc. (hai), warrants this product against defects in material and workmanship, under normal use and service, for a period of two (2) years from the date of purchase by the consumer. During the warranty period, hai will repair or replace, at its option, any ...