Home Decorators 326 960 AL14-TB Use And Care Manual - Safety Information

Manual is about: BENTLEY II 18 INCH CEILING FAN

Summary of 326 960 AL14-TB

  • Page 1

    Use and care guide questions, problems, missing parts? Before returning to the store, call home decorators collection customer service 8 a.M. - 6 p.M., est, monday-friday 1-800-986-3460 homedepot.Com/homedecorators thank you thank you bentley ii 18 inch ceiling fan item #326 960 model #al14-tb.

  • Page 2: Table of Contents

    Table of contents .......................................................... Safety information ......................................................... Warranty ......................................................................... Pre-installation .................................................

  • Page 3: Safety Information

    Safety information 3 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the national electrica...

  • Page 4: Warranty

    Specifications specifications tools required tools required phillips screwdriver electrical tape wire stripper flat blade screwdriver step ladder warranty 4 pre-installation pre-installation we warrant the fan motor to be free from defects in workmanship and material present at time of shipment from...

  • Page 5: Pre-Installation (Continued)

    Aa bb cc dd ee ff gg hh ii jj kk ll mm collar setscrew (preassembled) plastic wire nut balance kit (not to scale) canopy mounting bracket screw (preassembled) clevis pin (preassembled) cotter pin (preassembled) wall plate screw wall switch screw plastic wire nut hex wrench (not to scale) rear guard ...

  • Page 6: Pre-Installation (Continued)

    Part part g h i j k description description rear guard (preassembled) blade (preassembled) front guard (preassembled) wall plate wall switch part part a b c d e f quantity quantity 1 1 1 1 1 1 quantity quantity 1 1 1 1 1 description description mounting bracket (preassembled) canopy canopy bottom co...

  • Page 7: Installation

    To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar (oo) (not included) as shown above. If your ceiling fan does not have an existing ul-listed mounting box, then install one using the following instructions: □ disconnect the power by rem...

  • Page 8: Assembly

    1 preparing the canopy 2 preparing the motor □ remove the canopy bottom cover (c) from the canopy (b) by turning the canopy bottom cover (c) counter- clockwise. □ remove the mounting bracket (a) from the canopy (b) by removing the non-slotted canopy mounting screw (dd) from the bottom of the canopy ...

  • Page 9: Assembly — Hanging The Fan

    4 installing the mounting bracket to the electrical box hanging the fan from the mounting bracket □ pass the 120-volt supply wires through the center hole in the mounting bracket (a). □ install the mounting bracket (a) to the outlet box (nn) with the screws and washers provided with the outlet box (...

  • Page 10

    7 making the electrical connections if you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. □ disconnect the power and remove the existing wall plate and switch from the wall outlet box. □ set the knob on the wall switch (k) to...

  • Page 11

    8 installing the wall switch □ carefully tuck the wire connections inside the junction box. Secure the wall switch (k) with the two wall switch screws (hh) provided. □ attach the wall plate (j) over the wall switch (k) and secure with the two wall plate screws (gg) provided. Assembly — hanging the f...

  • Page 12

    9 installing the canopy assembly — hanging the fan (continued) b dd c b dd a nn c 12 10 attaching the canopy bottom cover to the canopy dd □ tuck the connections neatly into the ceiling outlet box (nn). □ slide the canopy (b) up to the mounting bracket (a) and place the key hole on the canopy (b) ov...

  • Page 13: Disassembling Your Fan

    Disassembling your fan this fan comes with a pre-assembled the rear guard (g), blade (h), and front guard (i) for your easy installation. Check that all screws are tight and securely in place. If you need to disassemble the fan for any reason such as cleaning, follow these steps below: □ loosen the ...

  • Page 14: Operation

    Operation wall switch operating instructions wall switch operating instructions restore power to the ceiling fan, and test for proper operation. The fan 3-speed control is used to set the fan speeds as follows: 0= turns the fan off 1= high speed 2= medium speed 3= low speed “off-on” slide button: th...

  • Page 15: Care and Cleaning

    Care and cleaning troubleshooting do do problem problem solution solution □ use water when cleaning. Water could damage the motor, or the wood, or possibly cause an electrical shock. □ apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings. Do not do not □ check th...

  • Page 16: Service Parts

    Service parts part part a b c d e f g h i j k description description mounting bracket (preassembled) canopy canopy bottom cover (preassembled) hanger ball/downrod assembly coupling cover motor head (preassembled) rear guard(preassembled) blade (preassembled) front guard (preassembled) wall plate wa...

  • Page 17

    Questions, problems, missing parts? Before returning to the store, call home decorators collection customer service 8 a.M. - 6 p.M., est, monday-friday 1-800-986-3460 homedepot.Com/homedecorators retain this manual for future use. Al14tb00000001-a.