Home Decorators WSFP46ECHD-8 Assembly Instructions Manual

Manual is about: Grafton 46 inch Media Console Infrared Electric Fireplace in Medium Brown Finish SKU # 693964

Summary of WSFP46ECHD-8

  • Page 1

    Thank you we appreciate the trust and confidence you have placed in home decorators collection through the purchase of this fireplace console. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home impr...

  • Page 2: Table Of Contents

    2 table of contents table of contents .......................................................... 2 safety information ......................................................... 2 warranty ......................................................................... 2 pre-assembly ...........................

  • Page 3: Pre-Assembly (Continued)

    3 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Pre-assembly (continued) hardware included note: hardware not shown to actual size. Part description quantity part description quantity aa cam lock 37 + 1 extra ll knob 2 bb cam bolt 37 + 1 extra mm knob bolt 2 cc w...

  • Page 4: Assembly

    4 assembly 1 attaching the cam bolts note: do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. □ unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit...

  • Page 5: Assembly (Continued)

    5 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Assembly (continued) 3 attaching the cam bolts □ securely screw six cam bolts (bb) into the designated small holes on the lower partition panels (i and j) by a phillips screwdriver. 4 attaching the center molding □ ...

  • Page 6: Assembly (Continued)

    6 assembly (continued) 5 attaching the lower partition panels and floor levelers □ insert four wood dowels (cc) into the inner holes of both lower partition panels (i and j) and attach them to the base (c) by using four long screws (dd). □ tightly screw two floor levelers (ss) onto the metal plates ...

  • Page 7: Assembly (Continued)

    7 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Assembly (continued) 7 attaching the middle crossbar assembly □ align and attach the middle crossbar assembly (p) to the center shelf (b) by using two wood dowels (cc) and three cam locks (aa). 8 assembling the cent...

  • Page 8: Assembly (Continued)

    8 assembly (continued) 9 fastening the middle crossbar assembly □ stand the assembled unit upright. □ fasten the middle crossbar assembly (p) to the left and right stringers (o and q) by attaching two metal brackets (ii) at the joints, using two black screws (ee) per metal bracket.. As shown. 10 att...

  • Page 9: Assembly (Continued)

    9 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Assembly (continued) 11 attaching the upper side panel moldings □ securely screw two cam bolts (bb) into the designated small holes on one side panel molding (g) by a phillips screwdriver. □ fasten the upper side pa...

  • Page 10: Assembly (Continued)

    10 assembly (continued) 13 attaching the cam bolts □ securely screw six cam bolts (bb) into the designated small holes on the top panel (a) by a phillips screwdriver. 14 attaching the top panel □ insert five wood dowels (cc) into the top inner holes on upper side panels (f) and partition panel (e )....

  • Page 11: Assembly (Continued)

    11 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Ff ff a d h h assembly (continued) 15 attaching the back panel □ pick up the upper back panel (d) and align the pre-drilled holes against the upper long edge with the pilot holes on the back stretcher of the top pa...

  • Page 12: Assembly (Continued)

    12 assembly (continued) 17 installing the door hinge □ extend the door hinges (pp) and rest the hinge cups onto the cutouts of one door panel (n). Secure the door hinges (pp) in place by using two zinc screws (gg) in each. □ attach one knob (ll) to the front side of the door (n) with one knob bolt (...

  • Page 13: Assembly (Continued)

    13 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Assembly (continued) 19 attaching the rubber bumpers and cam lock covers □ plug the cam lock covers (jj) onto the visible cams locks to conceal the cams. □ stick the rubber bumpers (nn) on the outer corners of door...

  • Page 14: Assembly (Continued)

    14 assembly (continued) 21 attaching the firebox support □ align and attach the firebox support (m) to the base (c) by screwing two large screws (hh) into the countersunk holes. 22 attaching the acrylic stopper note : you must install the acrylic tv stopper to prevent tv from tipping when placing yo...

  • Page 15: Assembly (Continued)

    15 homedepot.Com/homedecorators please contact 1-800-986-3460 for further assistance. Assembly (continued) 23 installing the tipping restraint hardware note : young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the un...

  • Page 16: Care and Maintenance

    16 care and maintenance a touch-up pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. To clean and care for your furniture: □ use a soft, clean cloth that will not scratch the surface when dusting. □ use of furniture polishes is not necessary. Sh...

  • Page 17

    Questions, problems, missing parts? Before returning to the store, call home decorators collection customer service 8 a.M. - 6 p.M., est, monday-friday 1-800-986-3460 homedepot.Com/homedecorators retain this manual for future use..