Item #550-073 use and care guide hugger 52 in. Ceiling fan model #al383-wh questions, problems, missing parts? Before returning to the store call home depot customer service 8 a.M. - 6 p.M., est, monday-friday 1-877-527-0313 homedepot.Com thank you thank you.
2 table of contents .......................................................... Safety information ......................................................... Warranty ......................................................................... Pre-installation ...............................................
Safety information 3 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the national electrical code “ansi/nfpa 70-1999” and local electrical codes. Electrical installation shou...
Specifications specifications tools required tools required note: these are approximate measures. They do not include amps and wattage used by the light kit. Warranty 4 pre-installation pre-installation we warrant the fan motor to be free from defects in workmanship and material present at time of s...
Pre-installation (continued) hardware included hardware included aa bb cc dd ee ff gg hh blade attachment screw and fiber washer plastic wire nut (not to scale) mounting plate screw and lock washer (not to scale) motor housing screw and lock washer (preassembled) blade arm screw and lock washer ligh...
Package contents package contents part part e f g description description blade arm light kit glass shade pre-installation (continued) 6 part part a b c d quantity quantity 1 1 1 5 description description mounting plate fan motor assembly motor housing blade quantity quantity 5 1 1 a b c f g d e.
To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar (jj) (not included) as shown above. If your ceiling fan does not have an existing ul-listed mounting box, then install one using the following instructions: □ disconnect the power by rem...
1 attaching the mounting plate to the electrical box hanging the fan from the mounting bracket □ attach the mounting plate (a) to the outlet box (ii) (not included) with two screws and washers provided with the outlet box (ii). Ensure the mounting plate (a) is tight and secured. Warning: to reduce t...
3 making the electrical connections warning: check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts (except for the ground wire). Warning: to reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control de...
4 finishing the fan installation □ swing the motor assembly (b) up into position under the motor mounting plate (kk). Secure the motor mounting plate (kk) to the mounting plate (a) with the screws and lock washer (cc) provided. 5 attaching the motor housing to the mounting plate □ carefully lift the...
C e ee 6 attaching the blades to the blade arms 7 fastening the blade assemblies to the motor warning: to reduce the risk of personal injury, do not bend the blade arms (e) while installing, balancing the blades (d), or cleaning the fan. Do not insert foreign objects between rotating fan blades (d)....
G gg f ff f b 8 attaching the light kit to the switch housing 9 □ remove the three light kit mounting screws (ff) from the light kit (f) and keep these screws. □ while holding the light kit (f) under your fan motor assembly (b), locate two single white and blue wires in the switch housing labeled "f...
Pull chain operating instructions pull chain operating instructions attach the two pull chains and fobs (hh) to the pull chains located on the switch housing (ll). Turn on the power and check the operation of the fan. The pull chain controls the fan speed as follows: 1 pull - high, 2 pulls - medium,...
Care and cleaning □ check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ clean your fan periodically. Use o...
15 homedepot.Com please contact 1-877-527-0313 for further assistance. Troubleshooting (continued) problem problem solution solution the fan wobbles. □ verify that all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once the fan is properly installed,...
Service parts part part a b c d e f g description description mounting plate fan motor assembly motor housing blade blade arm light kit glass shade part part aa bb cc dd ee ff gg hh description description blade attachment screw and fiber washer plastic wire nut mounting plate screw and lock washer ...
Retain this manual for future use. Al383000001-a questions, problems, missing parts? Before returning to the store call home depot customer service 8 a.M. - 6 p.M., est, monday-friday 1-877-527-0313 homedepot.Com.
