Construction and application this quadruple-beam balance is constructed to provide years of reliable, trouble-free operation. The beam is made of high-quality aluminum alloy for precise, consistent results. It has a tiered design for better visibility and faster operation. The agate beam bearings an...
Setup and zeroing after placing your balance on a smooth, flat surface, move each of the four sliding weights to the zero position on the left side of the beams. Be sure the 1g, 10g and 100g sliding weights fit into the "0" notches cut into the beams. Be sure the indicator point on the 0.01g sliding...
Weighing operation place the object to be weighed on the center of the pan and proceed as follows: 1. Starting with the rear beam, move the 100g weight to the right one notch at a time until the pointer drops. Then move the 100g weight back to the left one notch. 2. Now with the third beam, move the...
