Home Skinovations Ltd. Silk’n Flash&Go Quick Start Quide

Page of 10

Download

Print this page

Bookmark us

glish

Quick Start

Plan your Silk’n Flash&Go

™ hair removal for best results!

Treatments 1-4 – plan two weeks apart

Treatments 5-7 – plan four weeks apart

Treatments 8 + – treat as needed, until desired results are achieved.

Set up Silk’n Flash&Go

™!

1. Remove Silk’n Flash&Go™ HAIR REMOVAL UNIT and other components from box.

2. Verify that the DISPOSABLE LAMP CARTRIDGE is inserted properly at the tip of the device.

3. Plug the ADAPTOR cord into the Silk’n Flash&Go™ HAIR REMOVAL UNIT socket.

4. Plug the ADAPTOR into an electrical outlet. The STAND BY INDICATOR LIGHT will turn on.

Your Silk’n Flash&Go™ is now ready to start.

Treat with Silk’n Flash&Go

™ safely and properly!

5. Choose areas to treat that have not had recent exposure to the sun.

6. The skin of the treatment areas should be shaved, clean, dry and free of any powders, antiperspirants

or deodorants. Do not wax, pluck or tweeze the hair out.

Shaving is an important step to get the results you want!

7. Press the ON/STBY SWITCH. The POWER ON INDICATOR LIGHT (orange) will turn on and

a fan sound (similar to the sound of a hairdryer) will start.

8. Approximately 3.5 seconds after pressing the ON/ STBY SWITCH, the READY INDICATOR LIGHT

(green) will turn on. The device is then ready for you to trigger the first pulse at the lowest

energy level.

9. If this is your first treatment - Choose the energy level. Flash&Go offers 5 levels of energy from

1(the lowest) to 5 (the highest). To choose the right energy level for your first treatment, test each

treatment area separately:

Place the TREATMENT SURFACE on the skin and press the trigger to deliver one pulse.

If you did not experience abnormal discomfort press the + button once and deliver one pulse on a

different spot at energy level 2.

Continue testing at increased energy levels until you have reached the highest level that you feel

comfortable with. If within one hour you experience no adverse effects, you can start your full

treatment at that energy level.

Repeat this test for each body part you intend to treat.

Skin Test

1 2 3 4 5 6 7 Next › »

Summary of Silk’n Flash&Go

Page 1
1 en glish quick start plan your silk’n flash&go ™ hair removal for best results! Treatments 1-4 – plan two weeks apart treatments 5-7 – plan four weeks apart treatments 8 + – treat as needed, until desired results are achieved. Set up silk’n flash&go ™! 1. Remove silk’n flash&go™ hair removal unit ...
Page 2
3 2 en glish en glish 10. Set the energy level. If the energy level should be higher than the lowest, press the energy level setting buttons using the “-“ or “+” to respectively decrease or increase the energy level, until the desired energy level is set and represented by 3 energy level indicator l...
Page 3
5 4 en glish en glish 1. Before you start silk’n flash&go™ is a light-based device for hair removal with permanent results designed for home-use. 1.1. Silk’n flash&go™ device description your silk’n flash&go™ consists of a hair removal unit with a control panel and a disposable lamp cartridge. On th...
Page 4
7 6 en glish en glish comes with a built-in skin color sensor that is designed to measure the complexion of the applied surface and enable application only on suitable skin complexions. This unique safety feature will not let you treat where your skin is too dark or too tanned. Furthermore, the 1.3x...
Page 5
9 8 en glish en glish warning possible results safety tip a treatment area that has a history of herpes outbreaks. Light based treatments can cause adverse reactions on already sensitive areas. Consult your physician to received preventative treatment before using silk’n flash&go™. Do not treat with...
Page 6
11 10 en glish en glish if you have a history of skin cancer or areas of potential skin malignancies. Consult with your physician prior to using the silk’n flash&go. If you have received radiation therapy or chemotherapy treatments within the past 3 months. If you have any other condition which in y...
Page 7
13 12 en glish en glish expected treatment outcome for hair removal fitzpatrick skin type hair color light fluence [j/cm 2 ] anatomic area of the body 2 average number of treatments 1 effectiveness (% of hair removal/ regrowth) 1 i-vi light brown to brown 3-4.5 lower or upper legs session 10-12, app...
Page 8
15 14 en glish en glish skin coverage silk’n flash&go™ pulses should be administered in rows, starting at one end of each row and progressing sequentially towards the other end. This technique allows better control of skin coverage, and helps you avoid treating the same area more than once or overla...
Page 9
17 16 en glish en glish 9.2. After treating with silk’n flash&go™ when silk’n flash&go™ session has been completed turn silk’n flash&go™ off by pressing the on/stby switch. All the lit indicators will turn off and the stby indicator light will turn on (be sure to remember the last energy level setti...
Page 10
19 18 en glish en glish 11.1. “my silk’n flash&go™ does not start.” make sure the power adaptor is properly connected to the flash&go™ device. Make sure the power adaptor is plugged into an electrical outlet on the wall. 11.2. “a light pulse is not emitted when i press the pulse button.” make sure t...