1. DL manuals
  2. Home Theater Master
  3. Remote Control
  4. MX-500
  5. User manual

Home Theater Master MX-500 User manual

Other manuals for MX-500: Operating Manual, Operating Manual
Manual is about: LCD Screen Preprogrammed and Learning Remote Control

Summary of MX-500

  • Page 1

    Mx-500™ operating manual home theater master lcd screen preprogrammed and learning remote control home theater master lcd screen preprogrammed and learning remote control £—.

  • Page 2

    1. Introduction 2. Batteries a. Battery installation b. Battery life 3. Summary of operations a. Description of devices b. Preprogrammed codes c. Learning from other remote controls d. Macro operations e. Favorite channel buttons f. Punch through operations g. Editing lcd text h. Cloning the mx-500™...

  • Page 3

    Congratulations! You have purchased one of the most sophisticated remote control on the market. The mx-500™ has been designed to provide a new standard in remote control and infrared technology offering a very powerful and flexible preprogrammed, learning, menu- driven product. With the mx-500™ you ...

  • Page 4

    A. Battery installation before the remote control can be used, the supplied batteries need to be installed. First, unsnap the battery cover on the back of the unit and install the four aaa batteries inside the battery compartment as shown. Make sure the batteries line up with the (+) and (-) marking...

  • Page 5

    A. Description of devices the mx-500™ is designed to operate up to ten components on the market including audio receivers, cable and satellite boxes, tv, dvd (ld),vcr1, vcr2, cd, tape and aux. However, each of the device buttons and corresponding functions can be changed to meet your individual requ...

  • Page 6

    D. Macro operations the remote control is capable of sending out a series of commands with one button press. Any function available on your original remote control or in the pre-programmed database can be added to a macro button to completely automate what you would normally do by pushing buttons on...

  • Page 7

    6 h. Cloning the mx-500™ the mx-500™ is capable of sending and receiving all the programmed codes, text on the lcd and operations from one mx-500™ to another mx-500™. Please refer to page 25 in the manual for details. I. All other operations you can set the duration of the backlight on time, factory...

  • Page 8

    7 k. System settings all programming is done by first entering the system setting mode in the remote control. Press both the main and enter buttons simultaneously for three seconds to enter the system setting mode. Press any of the ten buttons associated with the descriptions written on the lcd. You...

  • Page 9

    You can program the mx-500™ to make it compatible with your components by following either the pre-programmed method instructions or by teaching it with your original remote controls. A. Using pre-programmed codes you can program the mx-500™ to make it compatible with your components by using the pr...

  • Page 10

    9 5. Select the device from which the appropriate three-digit code n u m b e r table will be selected. (e.G. If it is the tv code table, press the tv device button). 6. Point the remote control toward the component and enter the three-digit code number you selected for your component from the code t...

  • Page 11

    2. Auto scan with three digit number you can also program your remote control by sending out series of power off commands for different brands stored in the library by using the following steps. 1. Manually turn on the component you plan to operate. 2. Go to program setting mode in the remote contro...

  • Page 12

    7. Release the up or down button you were pressing as soon as the device is turned off. 8. Confirm that it is the right code by pressing power button. After the confirmation that the right code is entered, save the code by pressing the save button on the lcd. Later you may want to try other code num...

  • Page 13

    12 1. Programming function buttons 1. Go to the program setting mode by pressing both the main and enter buttons simultaneously for three seconds. 2. Press the learn button. 3. Select the device you wish to program. 4. Press the button on the mx-500™ you wish to program and place your original remot...

  • Page 14

    2. Programming the ten device buttons 1. Go to the program setting mode by pressing both the main and enter buttons simultaneously for three seconds. 2. Press the learn button. 3. Press the page button. 4. Press any of the ten device buttons you wish to program into the mx-500™ and place your origin...

  • Page 15

    You can create and program up to 50 favorite channel buttons and each favorite channel button can send out up to 10 commands with one button press. 1. Go to the program setting mode by pressing both the main and enter buttons simultaneously for three seconds. 2. Press the fav button on the lcd. 3. P...

  • Page 16

    15 there are two types of macro functions you can program with the mx- 500™. ¦u the m1, m2 and m3, power and system off buttons are designed to send out up to twenty commands from each of the five hard buttons. ¦u the ten device buttons on the main menu can send out up to twenty commands from each d...

  • Page 17

    3. Press one of the ten device buttons you wish to program for macro functions. 4. Select the device by pressing device button and then press the functional buttons you wish to store in the device macro button you selected. You can store up to 20 commands into the device macro buttons. 5. Save the c...

  • Page 18

    17 you can use the audio receiver volume control in a different mode ( eg. Audio receiver volume up and volume down and mute in satellite mode) using the volume punch through feature. You can also have channel punch through (channel up, channel down) as well as eight vcr or dvd transport buttons, pl...

  • Page 19

    18 a. Erasing learned buttons 1. Go to the program setting mode by pressing both the main and enter buttons simultaneously for three seconds. 2. Press the erase button. 3. Press the learn button to erase learned button(s). 4. If you wish to erase all the learned functions in mx-500™, press the all b...

  • Page 20

    19 3. Press the fav button to erase favorite channel button(s). 4. If you wish to erase all the favorite channel buttons in the mx-500™ press the all button and then press the sure? Button at the next lcd screen. If you wish to erase the each button, press the key button. 5. Press the favorite chann...

  • Page 21

    6. Press the main button to exit to main erase mode. Press the main button once again to exit the setup mode. 2. Erase macro functions in the ten device buttons 1. Enter the programming mode by pressing the main and enter buttons simultaneously for three seconds. 2. Press the erase button in program...

  • Page 22

    3. Press the vol button on the lcd for volume punch through, the play for transport punch through and the ch for channel punch through you wish to erase. 4. Press the device button you wish to erase punch through. 5. Press the same device button once again. 6. Punch through is erased when the same d...

  • Page 23

    22 a. To create or edit text on function and device buttons 1. Enter the programming mode by pressing the main and enter buttons simultaneously for three seconds. 2. Press the edit button in programming mode. 3. Press the device button you wish to write a text on the lcd. Tip) to edit the text on de...

  • Page 24

    23 b. To write a text for favorite channel buttons 1. Enter the programming mode by pressing the main and enter buttons simultaneously for three seconds. 2. Press the edit button in programming mode. 3. Press the fav button and then press the favorite channel button you wish to write a text. There a...

  • Page 25

    24 1. Go to the programming mode by pressing the main and enter button simultaneously for three seconds. 2. Press the recal button in programming mode. 3. The lcd display will alternately flash device names and the three- digit code number assigned to the device for 10 seconds and then exit to main ...

  • Page 26

    25 1. Go to the programming mode by pressing the main and enter button simultaneously for three seconds. 2. Press the clon button in programming mode. 3. Press either the send or recv button depending upon the role of the remote control. If the mx-500™ is to be copied from, press the send button. If...

  • Page 27

    Pressing the main and exit buttons for 10 seconds will erase all the learned and pre-programmed programs in the remote control and reset it to the factory default state. Pressing the main and up button of joystick simultaneously will make the lcd contrast darker and pressing main and down button of ...

  • Page 28

    The mx-500™ has an internal memory lock system that retains all of the programs and learned functions for an extended period in the event of battery loss. The mx-500™ is covered against any manufacturer’s defects or workmanship for a period of one year from the date of purchase. The warranty does no...

  • Page 29

    Button name functions 28 audio system-off power vol up vol dn ch up ch dn mute pre-ch up dn left right select play stop rew ff i >>i, guide o, exit ii, info 1 2 3 4 5 6 7 8 9 0 display enter off on/off vol up vol dn preset+ preset - mute scan up dn left right select rear up rear dn center dn center ...

  • Page 30

    Button name functions 29 tv system-off power vol up vol dn ch up ch dn mute pre-ch up dn left right select play stop rew ff i >>i, guide o, exit ii, info 1 2 3 4 5 6 7 8 9 0 display enter off on/off vol up vol dn ch up ch dn mute prev ch up dn left right select memu guide cancel info 1 2 3 4 5 6 7 8...

  • Page 31

    30 button name functions cable system-off power vol up vol dn ch up ch dn mute pre-ch up dn left right select play stop rew ff i >>i, guide o, exit ii, info 1 2 3 4 5 6 7 8 9 0 display enter off on/off vol up vol dn ch up ch dn mute prev ch up dn left right select play stop rew ff menu guide exit in...

  • Page 32

    Button name functions tape system-off power vol up vol dn ch up ch dn mute pre-ch up dn left right select play stop rew ff i >>i, guide o, exit ii, info 1 2 3 4 5 6 7 8 9 0 display enter off on/off play(a) stop(a) rew(a) ff(a) r-play(a) rec-mute(a) record(a) pause(a) 31 button name functions cd syst...

  • Page 33

    Button name functions 32 aux system-off power vol up vol dn ch up ch dn mute pre-ch up dn left right select play stop rew ff i >>i, guide o, exit ii, info 1 2 3 4 5 6 7 8 9 0 display enter off on/off vol up vol dn ch up ch dn mute prev up dn left right select menu guide exit info 1 2 3 4 5 6 7 8 9 0...

  • Page 34

    Set-up code number 007 082 092 225 161 269 018 104 170 202 203 213 211 188 138 189 125 126 127 128 258 281 282 054 196 142 141 147 135 194 221 011 021 196 207 071 167 273 134 096 097 070 170 224 023 006 028 061 071 201 214 226 180 185 022 029 077 284 076 140 034 134 148 272 026 076 002 034 109 215 2...

  • Page 35

    Manufacturer/brand nakamichi nec onkyo optimus panasonic parasound phast philips pioneer proceed rca realistic revox rotel samsung sansui sanyo scott sears sharp sherwood sony soundesign soundstream ssi sumo taekwang teac technics theta digital toshiba wards yamaha zenith set-up code number 111 244 ...

  • Page 36

    Manufacturer/brand alphastar amplica birdview bsr capetronics channel master chaparral citoh curtis mathes drake dx antenna echostar electrohome eurosat fujitsu general electric general instrument hitachi home cable houston tracker hughes hytek hyundai icr janiel kathrein legend lutron luxor macom m...

  • Page 37

    Manufacturer/brand admiral akai amark ampro amstrad anam aoc audiovox blaupunkt cairn candle capehart cetronic citizen classic concerto contec coronado craig crown curtis mathes cxc daewoo daytron dwin dynasty dynatech eiki electrohome emerson fisher fujitsu funai futuretech ge goldstar hall mark hi...

  • Page 38

    Manufacturer/brand nad nec nikei onking onwa optonica orion panasonic philco philips pioneer portland proscan proton quasar radio shack rca realistic roctec runco sampo samsung sanyo scott sears seleco sharp siemens signature sony soundesign spectricon sss supre macy sylvania tandy tatung technics t...

  • Page 39

    Manufacturer/brand aiwa akai ampro anam audio dynamics brooksonic canon capehart craig curtis mathes daewoo daytron dbx dynatech electrohome fisher funai ge go video goldstar harman kardon hitachi instantreplay jcl jcpenny jensen jvc kenwood lloyd lxi magin magnavox marantz marta matsui mei memorex ...

  • Page 40

    Manufacturer/brand runco salora samsung sansui sanyo scott sears sharp shintom signature sony soundesign sts sylvania symphonic tandy tatung teac technics teknika thomas tmk toshiba totevision unitech vector research victor video concepts videosonic wards yamaha zenith set-up code number 148 014 032...

  • Page 41

    Manufacturer/brand abc americast antronix archer bell south centurion century citizen combano comsat comtronics digicable eagle eastern echostar electricord gemini general electric general instrument gnc golden channel hamlin hitachi jerrold magnavox media one memorex mitsubishi m-net movie time nov...

  • Page 42

    Manufacturer/brand apex digital denon ge harman kardon jvc lg magnavox marantz mitsubishi nad onkyo panasonic philips pioneer proceed proscan rca samsung sharp sony theta digital thompson toshiba yamaha zenith set-up code number 087 007 080 026 027 084 012 091 057 074 066 083 017 088 076 035 021 042...

  • Page 43

    Manufacturer/brand adcom aiwa akai amc amend arcam audio access audio ease audio technica bsr california audio capetronic carrera carver casio clarinette creek crown denon emerson fisher fraba genexxa goldstar haitai harman kardon hitachi inkel jc penny jensen jvc kenwood koss krell kyocera lotte lu...

  • Page 44

    Manufacturer/brand quasar radio shack rca realistic rotel sae sansui sanyo scott sharp sherwood signature sony soundesign sumo sylvania symphonic taekwang tandy teac technics techwood theta digital toshiba vector research victor wards yamaha yorx set-up code number 103 008 182 017 042 150 042 050 05...

  • Page 45

    Manufacturer/brand denon funai kenwood magnavox marantz mitsubishi nad optimus panasonic philips pioneer radio shack rca realistic runco sanyo sharp sony technics theta digital toshiba yamaha set-up code number 206 207 120 152 013 032 121 211 121 121 049 013 113 032 106 117 121 120 002 049 127 075 1...

  • Page 46

    Manufacturer/brand aiwa carver denon fisher goldstar harman kardon jvc kenwood linn luxman magnavox marantz mcintosh mitsubishi nad nakamichi onkyo optimus panasonic philips pioneer quasar sansui sharp sherwood sony teac technics toshiba victor yamaha set-up code number 015 071 100 114 006 008 027 0...

  • Page 47

    Manufacturer/brand 3m aiwa archer auton dmx draper screen dwin everquest extron faroudja fuji jerrold jvc kenwood lite-touch lutron makita mindpath niles nsm piano disc plus philips polkaudio replay russound scientific atlanta sima solo electronics somfy sony starcom turboscan velodyne x-10 xantech ...

  • Page 48: 0 0 4 2 B

    0 e e - 0 0 4 2 b r e v. 1.0