Homecare 37602 Assembly Instructions Manual - page 5
Bed Accessories Installation
Soft Vinyl Top
1. Raise Crib Side Rails to fully closed position. Do not move Crib or operate Side Rails until Top
installation is complete.
2. Remove the square Black Cap and bolt from the top of each corner post of the Crib.
3. Turn Soft Vinyl Top right side up and place on Crib. You may need to loosen the 2 bolts that
hold each bracket to the Top.
4. Replace Crib bolts and tighten all bolts securely.
5. RETAIN BLACK CAPS for future use if Crib may be used without the Top at any time.
IV Pole & Bracket
1. Choose the corner post where the IV Pole will be used.
2. Remove the 2 bolts that attach the Mattress Deck. Discard bolts, retain nuts.
3. Position the IV Bracket as desired.
4. Insert the bolts that were included with the IV Pole and tighten securely.
5. Push IV Pole into receptacle until you hear it click into place.
6. To remove IV Pole: Pull knob and lift pole.
Storage Bin
• Place Storage Bin on Bottom Frame and position as desired.
Bumper Pads
• Unwrap Bumper Pads and attach to Crib bars with Velcro attachments.