HomeCinemaSolution EX100UHD User manual - page 4
EX100UHD User manual
HomeCinemaSolution Contact: info@homecinemasolution.it
4
Introduction
EX100UHD Extender (Transmitter + Receiver) is a Dual HDMI and VGA/Audio to HDBaseT
Switcher Extender. It switches between HDMI and VGA/audio inputs, digitizes, and transmits via
HDBaseT. It offers manual/auto-switching between both HDMI and VGA inputs.By using
EX100UHD the transmission distance for 1080P reaches 100 meters (330ft), and 4K x2K
reaches 70 meters (230ft).
EX100UHD
have the ability of equalization and amplification to ensure signal’s transmission
through long cable with PoE without quality loss.
EX100UHD was designed for simple low-cost systems in schools and businesses.
Features
Switching between HDMI and VGA with 3.5mm audio input, HDMI output with L/R Analog
audio and Coax Digital audio outputs.
HDMI v1.4 and HDCP compliant, support 1080p@60Hz, 3D and 4Kx2K.
Support 1080P@60Hz or VESA: 1920x1200@60Hz up to 100m (330ft).
Transmission distance for 4Kx2K@30Hz up to 70m (230ft).
Support all popular VGA resolution inputs:
640x480@60/75Hz, 720x400@70Hz, 800x600@60/75Hz, 1024x768@60/75Hz,
1152x864@75Hz, 1280x720@60Hz, 1280x768@60/75Hz, 1280x800@60/75Hz,
1280x960@60Hz, 1280x1024@60/75Hz, 1360x768@60Hz, 1366x768@60Hz,
1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz,
1920x1080@60Hz, 1920x1200@60Hz
Support Bi-Directional PoE and Bi-Directional IR.
Support EDID learning mode
RS232 supports 3 modes: Bypass through HDBaseT link(Default), update Valens FW and
update MCU FW
With ESD Protection.