I.D. AL MicroAMP2 Manual - page 6
® Waves System
V 1.0 - 2011
I.D. AL - MicroAMP2 - Audio amplifier for speaker & headphone - Manual
2 - Installation
1
2
- 4 -
4
1 - Headphone output
2 - Headphone Volume
3 - Speakers volume
4 - Switch on/off
5 - LED for power supply
6 - Power supply input 1 - 12v
7 - Power supply input 2 - 12v
8 - Audio line input 1
9 - Audio line output (by pass)
10 - Audio line input 2
11 - Speakers output
1 - Product presentation
The Micro AMP 2 is a double amplifier. The first is a Bridge-Tied Load (BTL) class-B amplifier. The output
power is 2x25W in a 4 Ohms load or 2x40W in a 2 Ohms load. The second is an headphone amplifier
capable of delivering 250mW of continuous average power to an 8 Ohms load with 0.1% THD+N
3
5
6
7
9
8
10
11
Power supply: If the application requires a regulated and filtered power supply or a battery, it must be
12V DC, even though the power switch can accept tension between 7v and 15V.
DC 2.1mm / 5.5mm connector - Positive in the center.
Connect the power supply unit or a 12V battery onto input 1 or 2. The
second socket is wired in parallel to provide power supply for another
device.
Optionnal amplifier
MicroAMP2