- DL manuals
- I.D. AL
- MP3 Player
- mkII
- User Manual
I.D. AL mkII User Manual
Summary of mkII
Page 1
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual user manual microplayer mkii audio player mp3/wav.
Page 2: Table of Contents
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual table of contents a - safety instructions 1 b - product information 3 1 - product presentation 4 2 - functionnalities 4 3 - installation 5 3.1 - connections 7 4 - operating mode 9 4.1 - organisation of the fo...
Page 3: A. Safety Instructions
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual caution! Do not expose to humidity & dust! Unplug the power supply cable before any servicing for your safety, please read the user’s guide carefully before operating your player. A. Safety instructions a.1 c...
Page 4
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual to draw your attention to the following instructions: • when using the device, comply with all local rules and regulations in force. Any modification or conversion of the device automatically entails loss of ...
Page 5: B. Product Information
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual a.6 - terms of use: • this product has been designed for indoors use only. • if this device has been exposed to very high temperature fluctuations (e.G.: after transportation), do not connect it immediately. ...
Page 6: 1 - Présentation
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 4 - 1 - présentation microplayer mkii reads wav and mp3 audio files. This standalone player can read files automatically according to a broadcast schedule or upon triggering by external events (input dry co...
Page 7: 3 - Installation
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 3 - installation 1 2 3 4 5 6 - power of the supply of the player 7 - usb host for flash drive 8 - serial link rs 232 9 - inputs on dry contact 10 - outputs on mosfet 11 - line level audio ouput 12 - amplified...
Page 8
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 2 - connect speakers or a sound system to the audio output and switch on the player thanks to the psu power supply unit: we recommend you to use the psu provided with the player. If you use another psu or a b...
Page 9: 3.1 - Connections
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 3.1 - connections 3.1.1 - inputs connections up to 4 triggerings, the connections are direct, beyond it is necessary to make combinations with diodes. The inputs match with a binary representation of the file...
Page 10
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 3.1.2 - outputs connection microplayer mkii offers 2 electronic switch outputs thanks to mosfet transistors offering a switch power up to 500ma per output. It is also possible to connect leds, motors, relays ...
Page 11: 4 - Operating Mode
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 9 - 4 - operating mode compatibles files: .Mp3: audio files mp3 format ( see annex c) .Wav: audio fileswav format ( see annex c) the file and folders names define the playback mode. The files and folders mu...
Page 12
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 10 - special case: folder 000 is the folder which will be played by default when powering on. When powering on, presence of this folder is checked ; if it is present, the player plays files of this folder. ...
Page 13
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 11 - in the above example, after reading folders 001, 002, a jump to folder 100 is made to read the content. After reading folder 100, the reading occurs in the previous folder, it has to say the folder rec...
Page 14
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 12 - at the end of the reading of the folder, the volume level goes back to its previous level. - if the variation values exceed the minimum or maximum values of the player, the levels are settled to their ...
Page 15
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 13 - example of a line contained in the sreial.Txt file. #001: 45 85 63 21 78 a5 b2 #002: 98 75 21 35 45 98 #100: 21 35 45 78 a5 b2 it is also possible to add comments in the file by using two times the typ...
Page 16: Optional Parameters
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 4.2 organisation of files inside folders. Like for folders, files name define the playback conduct. Note: the naming of the files is free if the reading is in a random mode. («rnd» option or no option in the ...
Page 17
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual ● ● ● ● ● [jxxx] designates the folder number to use after reading the current file. By adding this parameter within the file name, you define the conduct of the player at the end of the reading of the curren...
Page 18
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 001 [dt].Mp3 - the instruction of interruption is memorised and will be executed at the end of the file. An action on one of the input contacts, through rs232 link or any other is memorised and the reading of...
Page 19
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual an example to trigger the reading of the folder 001 of another microplayer mkii. #001/ 80 01 01 example of files: 001[rs001]: sending of the bytes of the line #001 of the serial.Txt file on reading of the fil...
Page 20: 5 - Setup File
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 18 - 5 - setup file some functionalities are only accessible via a setup file. This file is a text file (raw text without page setting ) that can be created with any easy text editor like « notepad « from w...
Page 21
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 19 - command line : #volume:xx xx = a value between 00 and 64 example : #volume:18 the volume will be from 18 on powering if the line is missing the last known value by the player will be used. 5.3 - energy...
Page 22
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 20 - receives an instruction, this same instruction is sent to its output and so on. Caution , when numerous players are chained up a latente period can exist at the end of the chain. ● mode 2: monitoring m...
Page 23
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 21 - 5.7 - assign particular functions to the inputs - # inputxxx:function by default, input contacts trigger folders in order to read their content. For a better versatility of the player, it is possible t...
Page 24
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 22 - 5.8 - assign particular functions to buttons - #buttonx:function the two front buttons are dedicated by default to the volume setting. With the file config.Txt, it is possible to assign them other func...
Page 25
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual function value by default #id:xxx xxx = from 001 to 127 001 #volume:xx xx = from 0 to 64 dernière valeur utilisée #power:x 0 : disabling the energy saving mode 0 1: enabling the enrgy saving mode #rs_monitori...
Page 26
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 6 - rs232 serial link protocol the microplayer can communicate with other devices by receiving instructions onto the rx input or transferring data through its tx output. The player complies with the rs232 nor...
Page 27
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual list of commands: 00h: not used x1h ( 01h to 71h): "go to" folder command 02h: transport bar command 03h: volume control command ● ● ● ● ● 00h - 00000000b: not used ● ● ● ● ● 01h à 71h - 0xxx0001b: command of...
Page 28
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual example of the full frame: 81 02 01 octet 1 : 81h - 10000001b : status byte, player 001 octet 2 : 02h - 00100001b : transport bar command octet 3 : 01h - 00010110b : playback command ● ● ● ● ● 03h - 00000011b...
Page 29
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual mode 2: "monotoring" mode in this mode, the player send informations onto the tx output depending on the actions executed. This mode do not allow to chain up the players. The player allows to a plc, a compute...
Page 30
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual 7 - from the microplayer to the microplayer mkii the microplayer mkii has evolved and the file/folder naming mode has changed. To ease this proceed from the old model to the new one, please find hereafter som...
Page 31: Annex A - Characteristics
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual annex a - characteristics • power supply: nominal voltage : 12v dc supply range : 9v to 14v dc • 12v supply consumption: - stand by with active energy saving mode: 27 ma - on operating ( line output - amplifi...
Page 32: Annexe B - Functionalities
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual annexe b - functionalities audio characteristics • reads mp3 files mono/stereo (mpeg ½ layer 3), 44.1khz / 48khz, from 32kbit/s to 320kbits/s • reads cbr (constant bit rate) and vbr (variable bit rate) files ...
Page 33
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual - 31 - annexe c - infrared remote control the microplayer mkii can be controlled with an infrared remote control as an infrared sensor is fitted in the front of the player. With this remote control you can: t...
Page 34: Http://www
? waves system v 1.0 - 2013 i.D. Al - microplayer mkii - wav mp3 audio player - user manual http://www http://www http://www http://www http://www.Id-al.Com .Id-al.Com .Id-al.Com .Id-al.Com .Id-al.Com.