I.Dream i-Classic User Manual - page 5
5
Listening to the radio
1.
Press the RADIO/BAND button to activate the radio.
2.
If necessary press the RADIO/BAND button again to select AM or FM band.
3.
Press the TUNING +/- button to tune to desired station.
4. Automatic
Tuning:
●
Press and hold the TUNING +/- button until the display starts to scan, and then release the
button.
●
The tuner will stop on the first strong station it finds.
●
Repeat this procedure until the desired frequency appears in the display
5. Manual
Tuning:
●
Repeatedly press the TUNING +/- button to manually move the display up or down until you
reach the frequency of the desired station.
NOTES:
Use manual tuning to select weaker stations that might be bypassed during automatic tuning.
If the automatic tuning does not stop on the exact frequency of the station, for example it stops on 100.85 MHz
instead of 100.8 MHz, use the manual tuning method to “fine tune” to the exact frequency of the desired
station.
6. PRESET RADIO STATIONS
The unit allows you to store up to 10 AM and 10 FM stations in the tuner preset memories for east recall at any
time.
●
Press the RADIO/BAND button to activate the radio.
●
Press the RADIO/BAND button again to select AM or FM band.
●
Tune to desired radio station using TUNING +/- button.
●
Press the memory SET button once, preset channel number 01 will appear on display.
●
Use PRESET buttons to select desired preset channel number.
●
Press SET button again to confirm storage of setting.
LISTENING TO LINE INPUT
●
Plug the audio cable into the audio output jack of your auxiliary device and the other end into the LINE IN
jack of the unit.
●
The sound of the auxiliary device will be heard through the unit’s speaker.
●
If the unit is in a mode other than LINE IN, press FUNCTION button of the remote to select LINE I N
mode.
C
LOCK
SETTING
TO SET TIME
Press SET button twice, the display will flash.
Press VOLUME +/- button to set advance or reverse the hour.
Press TUNING+/- button to set advance or reverse the minute.
Press SNOOZE/LIGHT button to save entries or just wait for around 5 seconds to exit setting mode.
TO SET ALARM
Press SET button once, and the display will flash.
Press VOLUME +/- button to set advance or reverse the hour.
Press TUNING+/- button to set advance or reverse the minute.
Press PRESET button to select the alarm sound source (iPod®, RADIO or BUZZER).
Press SNOOZE/LIGHT button to save entries or just wait for around 5 seconds to exit setting mode.
Press the ALM ON/OFF button to switch on the daily alarm, a ALARM icon will appear on the display.