I-Flash DSM2V Series User Manual - page 10
i-Flash Technology Limited
Rm 1110, 11F, Fabrico Industrial
Buildings, 78 Kwai Cheung Road,
Kwai Chung, NT. Hong Kong
Web:
Tel:
Fax:
Email:
www.iflashtec.com
+852 2110 9587
+852 3585 5233
info@iflashtec.com
PULSE DS Mark II V Series Installation Guide
10 |
P a g e
Configuring the DSM2V via Web Browser
The DSM2V’s embedded Web server responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer.
Access DSM2V Web Configuration Menu
Connect the Camera to DHCP server.
1. Run the Search tool provided in Software CD
2. Click
on button in order to begin device detection
3. The detected devices will appear in the Output field
4. Start Internet Explorer on your computer
5. Enter device IP in the address bar of the browser or double click the camera in Search tool
6. Enter the administrator user name and password to access the Web Configuration Interface
7. The default user name and password are both set to admin.
8. IE will indicate that “This website wants to install the following add-on:
9. Install this add-on by following the instructions in IE.
10. You will see the home page.