I-Flash P2DV Series User Manual - page 10
10 |
P a g e
Pulse P2DV Series User Manual
Configuring the P2DV via Web Browser
The P2DV’s embedded Web server responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer.
Access P2DV Web Configuration Menu
Connect the Camera to DHCP server.
1.
Run the Search tool provided in Software CD
2.
Click on button in order to begin device detection
3.
The detected devices will appear in the Output field
4.
Start Internet Explorer on your computer
5.
Enter device IP in the address bar of the browser or double click the camera in Search tool
6.
Enter the administrator user name and password to access the Web Configuration Interface
7.
The default user name and password are both set to admin.
8.
IE will indicate that “This website wants to install the following add-on:
9.
Install this add-on by following the instructions in IE.
10.
You will see the home page.