I-GO Flyte90 User Manual - 7. Troubleshooting

PAGE 21

7. TROUBLESHOOTING

Suggestion

We recommend only using I-GO replacement parts. Not using original I-GO 

parts can void the warranty.

Looseness in chair

Chair squeaks or rattles 

Castor flutter

Wheelchair feels heavy

Sluggish turning

Chair veers left

Chair veers right

Check all nuts and bolts are tightly stuck. 

Rear wheels and/or castors may be adjusted improperly. Make sure  

both rear wheels and castors are mounted in identical positions.

Check for wear on the bearings.

Castor forks may be adjusted improperly.

Castor forks may be adjusted improperly.

SYMPTOM

POSSIBLE CAUSE AND CORRECT SOLUTION

Your I-GO wheelchair is built to be used immediately. Continual use necessitates regular 

maintenance, particularly when factory settings have been altered.

Consult the following troubleshooting guide for a list of common problems and 

suggested fixes.