Summary of IGO -
Page 1
Quick start guide igo gps navigation software.
Page 2
Thank you for choosing igo as your in-car navigator. The sd card version of the program is very easy to use. You only need to plug the card into your pda. A simple setup procedure will run automatically, and later on inserting the card into the pda will automatically start igo and removing it will e...
Page 4
4. To complete the one time setup you need to do the following: • if you already have a gps device at hand, connect it to your pda before starting the setup. • insert the igo sd card into your pda. • after a few seconds the first screen of the setup program appears. Choose the language of the progra...
Page 5
5. How to start the setup manually even if your pda does not support the automatic setup, it is also easy to start manually. Apply the same procedure later if you wish to change the language of the program or the voice profile used. Note: reinstalling the program will not erase any of your previousl...
Page 6
6. Ready to navigate now that the installation is complete and igo is running, you are ready to start using it. Without a gps it can be used as a digital map (e.G. To search for addresses or for poi, to browse the map or use it as an off-line reference for navigation), but with the addition of a gps...
Page 7
7. The first steps if you have a gps: make sure your gps has already been recognised by the handheld computer (e.G. A bluetooth gps device needs to be searched for, connected and paired using the built-in bluetooth manager application of the pda). Now you are ready to set up the connection to igo. W...
Page 8
8. Unless you are inside a building or under heavy foliage, shortly after that the satellite positions and reception strength bars should appear in the upper section of the screen, and when the gps device finds its position, the exact location coordinates together with date, time, accuracy, elevatio...
Page 9
9. Tap ok to return to the gps data screen having the gps receiver connected with your settings, or tap the arrow in the top left corner to cancel the operation leaving the factory settings untouched. If you have selected ok and your settings were correct the result will be the same as with the dete...
Page 10
10. Out on the road the first steps of the gps aided navigation are also very easy. If you have no exact destination to reach or you just want to try igo cruising around for a while, tapping cockpit in the main screen will take you to the driving screen where the automatically rotated 3d map will in...
Page 11
11. As soon as you pick any location in find, igo will switch to the cockpit screen and navigation begins. Just listen to the voice and follow the instructions. Now you are using igo for navigation, its main function. This was the aim of this short manual. To explore the full functionality and extra...
Page 12
? nav n go ltd. All rights reserved..