I-GO Outlander WC01059 User Manual - 4. Safety Warnings

PAGE 4

Getting In And Out Of The Wheelchair 

Before you get into your wheelchair, you must make sure it’s on a flat surface with the 

brakes applied and the leg rests flipped sideways. Make sure you are as close as  

possible to the wheelchair and the castors are in the forward direction. Now you can, 

leaning on the armrests, make the transfer to the wheelchair.  To get out of the  

wheelchair, follow the above instructions in reverse. 

Bending Or Reaching

To reach an object whilst you are in your wheelchair, make sure you are as close as  

possible to the object and that the front wheels are facing forwards and the brakes  

applied to avoid falling out of the chair.

4. SAFETY WARNINGS

5. USER INSTRUCTIONS

»

Never connect anything to the wheels, this may cause damage to the chair and 

also effect the balance of the chair and may injure the user; 

»

Do not push the wheelchair with the brakes engaged. This may cause damage to 

the wheelchair and a dangerous situation may occur; 

»

The maximum user weight capacity has been indicated on your frame  

label - do not exceed it; 

»

The wheelchair is suitable for one person at a time - do not allow multiple  

users at once. 

Warning

The implementation of structural changes to the I-Go Outlander wheelchair 

will invalidate the warranty.