I-tec ADUANCE Series User Manual - page 6
INTRODUCTION
i-tec USB 3.0 Metal Charging HUB is an ideal companion for everybody who does not have enough USB
ports in his/her notebook, ultrabook or PC and who has to constantly connect and disconnect his/her
favorite USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3 players,
printers, etc.
This HUB offers 4 USB 3.0 ports with the Plug & Play function and standard USB charging – the HUB
will automatically detect connected equipment for USB charging. The USB 3.0 interface is important
mainly for data transfers from USB 3.0 memory cards and flash disks which will use its high transfer speed
most.
The advantage is included external power adapter which you can use for backing up data on external
hard drives or for connecting high power consumption devices which are powered directly from the USB
port.
This HUB does not require installation of drivers. You will just connect it by the USB cable to your
computer and immediately you can start using it. This HUB has a built in overcurrent protection of your
computer in case of short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.
Thanks to its compact dimensions and low weight it is an ideal companion to your notebook when
traveling.
INSTALLATION IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 AND HIGHER, MAC OS X AND HIGHER
The HUB is installed automatically, no need install drivers. Connect the connector of the power adaptor to
the HUB and connect the power adaptor to a socket outlet with 230V. Then plug the HUB via USB cable into
available USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the on-screen
instructions. The HUB will be installed and displayed in Device manager as “Generic USB Hub” and
“Generic USB SuperSpeed Hub”.
DESCRIPTION
1. 4x output USB 3.0 ports for connecting USB equipment
2. LED diode – the diode is ON when the HUB is connected to the power adaptor or to a USB
port of a notebook / PC
3. Input for connecting the power adaptor
4. USB 3.0 cable type A for connecting to a notebook / PC
CHARGING
You can use external power adapter, if you connect printer, scanner or other high power consumption
devices to USB ports in HUB (power adapter is included). Respect the basic rules while using this power
adapter (for ex. do not let in reach of children, if the adapter is in 230 V circuit, do not put it into the water and
so on).
CHARGING
The HUB supports charging of the connected USB mobile equipment such as smartphones (including
iPhone and Samsung phones), e-book readers, multi-media players, GPS navigators, and tablets (e.g.,
Asus, Toshiba, GoClever, Prestigio, Emgeton, Sencor). Using the original cable connect the equipment to
be charged to the USB port of the HUB. At the same time the power adaptor needs to be connected to the
HUB as well.
SYSTEM REQUIREMENTS
Hardware requirements
i-tec USB 3.0 Metal Charging HUB 4 Port
E
N
G
L
IS
H
EN
05