I-tec ADUANCE Series User Manual - Quick Start
EN
05
- Do not attempt to dismantle or modify the adapter. This would cause a risk of fire, bodily injury or damage
to personal property. If any repair is necessary please contact the manufacturer (ComDis s.r.o.).
- Do not expose the adapter to direct sunlight. Do not place the adapter on radiators or other heat source.
- Do not use the adapter in an environment with temperature lower than 0 °C or higher than 40 °C.
- Do not use the adapter with damaged input connector, output cables or fuses.
- Make sure the power adapter voltage and polarity are set correctly for your equipment.
- This power adapter supports the output up to 90 W. Please check the maximum power consumption of
your equipment (which should not be higher than 90 W) before use.
GUARANTEE
The standard guarantee period for the product is 24 months. In the event you lose the connector applied to
power your equipment ComDis s.r.o. offers free delivery of a substitute connector. For more information on
this service contact ComDis s.r.o. by e-mail info@comdis.cz and give us address for sending and type of
connector.
The guarantee for the product will be null and void if:
- it gets into contact with a liquid;
- it is damaged by a strong shock, impact, fall or other mechanical effect;
- it is placed close to a fire;
- it shows other visible damage caused by any unauthorized action or improper handling;
- its cabling is damaged.
FAQ
Question: Who can help me, if I will loose or damage one or more connectors, eventually cable of device?
Answer: In that case, pls, contact direct distributer of i-tec label in Czech Republic, ComDis s. r. o. We will
send you missing connector(s), eventually cable. Please, contact us by e-mail info@comdis.cz and give us
address for sending and type of connector.
Quick Start
E
N
G
L
IS
H