I-tec K104 User manual - page 7
NEW HDD FORMAT
1. Right click „Computer“.
2. Select „Manage“.
3. Left click „Disk Management“.
4. Choose „Unallocated“ HDD with right capacity.
5. Right click disk area and select „New Simple Volume“, then click
„Next“.
6. Use max. capacity of Volume and click „Next“.
7. Select „Assign the following drive letter“ and click „Next“.
8. Select „Format this volume with the following settings“ (use
original settings). Click „Next“ and „Finish“.
9. Format of HDD will process. Format time depends on capacity
of volume. After finish is HDD visible in OS.
PACKAGE CONTENT
External enclosure for 2.5“ HDD with built-in cable (15 cm)
User's Guide
FAQ
Question: Enclosure is not detected in OS.
Answer: Connect device into another USB port.
Question: HDD is not visible in OS?
Answer: Make sure of HDD is formatted.
Question: After connecting to Express Card is enclosure
insufficiently power supplied (doesn't spin, doesn't detect in OS).
Answer: Connect additional power supply cable to Express Card.
Quick Start
E
H
N
G
L
IS
EN
06