I-Tech CIP900-IP-TR Installation And User Manual

Summary of CIP900-IP-TR

  • Page 1

    1 cip900-ip-tr hdmi with usb over ip intranet (multi-cast version) installation and user’s manual i-tech company llc toll free: (888) 483-2418 • email: info@itechlcd.Com • web: www.Itechlcd.Com 2 introduction the cip900-ip-tr system is a perfect solution to extend hdmi, usb, and optional ir/rs-232/r...

  • Page 2

    3 panel view cip900-ip-t transmitter no. Component description 1 hdmi (or dvi-d) loop-out hdmi (or dvi-d) loop-out for local monitor. 2 (button 1) short press switch video to remote or loop-out monitor. Long press output video to both remote and loop-out monitors. Press and hold at power on until gr...

  • Page 3

    5 10 usb-to-pc connects this usb-b to pc to provide 2 functions: 1. Usb audio device. (an usb audio device will be detected when it is attached to pc in windows os) 2. Virtual 4-port usb hub for remote usb devices. 11 hdmi in connects to hdmi source. For dvi source, you may need a hdmi-to-dvi adapte...

  • Page 4

    7 press and hold at power on until green and red led blinking reset the unit to the factory default setting 9 dc 5v in system power input 5v 2a, or 4a when used with 4 x usb devices. 10 hdmi out connects to hdmi display. For dvi display, you may need a hdmi-to-dvi adapter cable. 11 rs-232 control (o...

  • Page 5

    9 9. Connects cip900-ip-t usb-to-pc port to a windows based pc usb port by an usb-a-b cable. You shall see 3 devices are detected: “generic usb hub”, “usb composite device”, “usb pnp sound device”. 10. You can select “usb pnp sound device” as windows default sound device in order to use speaker and ...

  • Page 6

    11 rs-232 control (optional) this function has been designed to remote access and control of any rs-232 device. 1. Connects the 3.5m mini-stereo plug of the supplied rs-232 cable to the [rs-232] socket at the rear panel of the cip900-ip-t transmitter, and then connect the db9 female connector of the...