I. Tech Dynamic Arrow Lite-R User Manual

Arrow Lite-R

Getting Started 

Arrow Lite-R Overview

Fig.1

1  Status Indicator (This small 

light will flash red, green or 

orange dependant on 

pairing mode and 

operation)

2  Multi-function Button (MFB)

3  Charging Socket

4  Built-in Microphone

5  Built-in Rechargeable 

Battery

6  Ear Hook

7  Volume Button(+/-)

8  Earpiece

To use your Arrow Lite-R Bluetooth Headset (“the headset”), please follow the steps below:

1.  Ensure your headset is fully charged

2.  Pair your charged headset with a Bluetooth-enabled mobile phone

Declaration of Conformity

We, i.Tech Dynamic Ltd., declare that the following product:

Product Name: Arrow Lite-R

Model No.: C51-A06104-XX

Is in conformity with the following essential requirements of Council Directive 1999/5/EC 

( referred to as R&TTE Directive ) : Article 3.1a, 3.1.b and 3.2. and the product is 

manufactured in accordance with Annex II of above directive.

A copy of the Declaration of Conformity can be found at:

http://www.itechdynamic.com

Product Specifications

Bluetooth Specification: 

v2.0+EDR Class 2 

Bluetooth Profiles Supported: 

Headset and Handsfree

Range of Frequency: 

2.4GHz Spectrum

Reception Distance: 

10 metres

Normal Charging Time: 

Within 3 hours

Talk Time*: 

Up to 7 hours

Standby Time*: 

Up to 120 hours

Dimensions: 

57.6 (L) x 20.7 (W) x 25.8 (H) mm

Weight: 

13.7 grams

*may vary due to users’ operation mode and mobile phone settings

ENGLISH

6

8

7

5

1

2

4

3

Charging Your Headset

The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it 

is recommended to fully charge the battery first.

Important : The headset will turn off and no operation while in charging mode. For details, please refer 

to "Charging your headset" section.

Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the mains charger 

to an AC wall outlet. The light on the Arrow Lite-R (status indicator) will stay red during charging.

IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for 

a long time or the battery is drained.

Normal Charging Time

It takes about three hours to fully charge the battery. When the battery is fully charged, the status 

indicator will turn off. Unplug the mains charger from the AC wall outlet and the 

Wearing Your Arrow Lite-R

Fig. 2 Wearing your headset

    Charger    

Fig.3

Charging

Socket

Charger Plug

2

4

3

1