1. DL manuals
  2. I-Tech
  3. LCD Drawer
  4. RKP1015-1602
  5. User Manual

I-Tech RKP1015-1602 User Manual

Manual is about: 1U 15” / 17” / 19” Rackmount LCD Keyboard Drawer with PS/2 2-Console KVM Switch

Summary of RKP1015-1602

  • Page 1

    User manual rkp1015 / 1017 - 1602 1u 15” / 17” / 19” rackmount lcd keyboard drawer with ps/2 2-console kvm switch.

  • Page 3: 1.  Table Of Content

    Rev. : 1.0 p.1 1. Table of content 1. Table of content p.1 2. Introduction p.2 3. Features p.2 4. Package contents p.3 5. Optional accessories p.4 6. Peripheral products p.4 7. Important safeguards p.5 8. Structure diagram p.6 9. Dimension diagram rkp1015-1602 p.7 rkp1017-1602 p.8 10. Lcd session lc...

  • Page 4

    Rev. : 1.0 p.2 rkp series is a combination of keyboard, mouse and monitor into a drawer, with features such as flip-up design, adjustable brackets, built in lcd osd to provide effective assistant for an administrator to control pc system. Rkp series provides cost effective for your limited it budget...

  • Page 5

    Rev. : 1.0 p.3 4. Package contents before unpacking it is very important to locate the lcd keyboard drawer in a suitable environment. ● the surface for placing and fixing the lcd keyboard drawer should be stable and level or mounted into a suitable cabinet. ● make sure the place has good ventilation...

  • Page 6: 5.  Optional Accessories

    Rev. : 1.0 p.4 5. Optional accessories 6. Peripheral products model description cv-801 8-port ps/2 kvm switch cv-1601 16-port ps/2 kvm switch cv-101 cat.5 ps/2 kvm extender cd-6 / 10 / 15 6ft / 10ft / 15ft 3-in-1 kvm cable ca-6 / 10 / 15 6ft / 10ft / 15ft ps/2 3-to-3 cascade cable sun-31 sun / imac ...

  • Page 7: 7.  Important

    Rev. : 1.0 p.5 7. Important safeguards rkp1015 / rkp1017 user manual please read all of these instructions carefully before you use the device. Save this manual for future reference. ● unplug the lcd keyboard drawer from the power outlet before cleaning. ● do not spray liquid cleaners or aerosol dir...

  • Page 8

    Rev. : 1.0 p.6 8. Structure diagram rkp1015 / rkp1017 user manual • ‚ ƒ „ … Š ‡ ˆ † ‰ Š 1. Keyboard 2. Aluminium front panel 3. Class a active matrix tft lcd panel 4. Rear metal case 5. Analog to digital signal converter board 6. Lcd inverter 7. Lcd membrane 8. Ball bearing telescopic slides with st...

  • Page 9: Rkp1015-1602

    Rkp1015-1602 1u 15 ” lcd keyboard drawer with ps/2 kvm (two consoles) 9. Dimension diagram rkp1015 / rkp1017 user manual 15 ” lcd rev. : 1.0 p.7.

  • Page 10: Rkp1017-1602

    Rkp1017-1602 1u 17 ” lcd keyboard drawer with ps/2 kvm (two consoles) 9. Dimension diagram rkp1015 / rkp1017 user manual 17 ” lcd rev. : 1.0 p.8.

  • Page 11

    Rev. : 1.0 p.9 lcd session rkp1015 / rkp1017 user manual.

  • Page 12: Lcd Membrane Diagram

    Rev. : 1.0 p.10 lcd membrane diagram left right exit menu/selection power main menu bright/contrast auto adjust phase/clock h/v position misc reset main menu bright / contrast ● to enter into the bright, black level & contrast sub-menu auto adjust ● to perform automatic optimisations of all function...

  • Page 13

    Rev. : 1.0 p.11 bright / contrast 1. Brightness ● to perform brightness adjustment of the input rgb signal ● use the left & right button to adjust and button to “brightness” 2. Contrast ● to adjust the contrast level of the input signal ● use the left & right button to adjust and button to “contrast...

  • Page 14: Misc

    Rev. : 1.0 p.12 misc 1. Information ● the first header row shows the current resolution setup ● the second header row shows the horizontal frequency of the current input signal ● the third header row shows the vertical frequency of the current input signal 2. Osd timer ● to modify the duration of th...

  • Page 15: Resolution Settings

    Rev. : 1.0 p.13 resolution settings for microsoft windows step 1 – press right click on the desktop step 2 – choose “properties” step 3 – change the “screen resolution” step 4 – change the “screen refresh rate” 10. Lcd session rkp1015 / rkp1017 user manual.

  • Page 16

    Rev. : 1.0 p.14 10. Lcd session resolution settings for sun servers ● resolution configuration procedures should be run by qualified sun server administrator ● sun servers are using resolution at 1152 x 900 x 76hz. ● supported resolution mode for 15 ” lcd: ● 1024 x 768 x 70/75hz ● supported resoluti...

  • Page 17

    Rev. : 1.0 p.15 kvm session rkp1015 / rkp1017 user manual.

  • Page 18: 11. Kvm Session

    Rev. : 1.0 p.16 front view channel select button selected channel bank button bank no. Shift button online channel led indication selected channel - displayed channel on monitor & red in led. Channel select button - press to select channel from 1 – 8. Shift button - press & hold follow with a channe...

  • Page 19: 11. Kvm Session

    Rev. : 1.0 p.17 11. Kvm session rear view cascade port channel port dc power dc power - connect to external 12v dc power adapter. Cascade port - connect to additional kvm switch for channel expansion. Lan port - connect to receiver by utp / stp cable. Channel port - connect to pc computer with cd-6 ...

  • Page 20: 11. Kvm Session

    Rev. : 1.0 p.18 11. Kvm session rkp1015 / rkp1017 user manual installation steps before installation, please make sure all computers are turned on and its operating system are running properly with keyboard and mouse. 1. Connect the 3-in-1 kvm cable to the one of your server. ● mini din 6-pin male c...

  • Page 21: 11. Kvm Session

    Rev. : 1.0 p.19 cascading using a ca-6 / 10 / 15 cascade cable to connect from bank 1 ’s “cascade port ” to bank 2’s “console port”. After connected please press “bank” & “channel” button on the front of the ps/2 kvm switch to reset the kvm switch. Ca-6 cascade cable ca-6 cascade cable bank 1 bank 2...

  • Page 22: Hotkey Command

    Rev. : 1.0 p.20 1. The channels that have pc connected and it is switch on will have a green led on that channel. 2. The red led will indicate the selected channel. 3. 7 segments led will display the bank number. 4. Press channel button to select the channel. 5. Enter the password, default is “00000...

  • Page 23: Hot-Key Command Operation

    Rev. : 1.0 p.21 hot-key command operation 1. Calling osd menu 2. Switch to previous port (powered on pc only) 3. Switch to next power on port (powered on pc only) 4. Switch to previous bank 5. Switch to specific port example : a) bank 1 port 4 b) bank 2 port 16 bank 1~8 no. 0 or 1 no. 0 - 9 second d...

  • Page 24: Hotkey Command Operation

    Rev. : 1.0 p.22 hotkey command operation 6. Switch to next bank 7. Enable / disable beeper sound 8. Auto scan for powered on pc 9. Reset to factory default setting 10. Find port by name rom reflash f i n d : █ note: the default beeper function is on and beeper control is only for available for scan ...

  • Page 25: 12. Start Up

    Rev. : 1.0 p.23 12. Start up rkp1015 / rkp1017 user manual bank : 1 01 system 01 02 ® system 02 e 03 ® system 03 ® system 04 05 ® system 05 06 system 06 07 system 07 08 ® system 08 osd : 1 0 sec. Change password scan: 1 0 sec. Console on/off esc : quit enter :complete tab : next insert :edit á/â: se...

  • Page 26: 12. Start Up

    Rev. : 1.0 p.24 12. Start up rkp1015 / rkp1017 user manual kvm settings session 1. Osd ● osd menu on screen time default is 10 seconds. ● it can be modified from 05 – 99 seconds. 2. Scan ● scan interval from one pc port to next pc port when applying auto scan, its default is 10 seconds. ● it can be ...

  • Page 27: 13. Faq

    Rev. : 1.0 p.25 13. Faq rkp1015 / rkp1017 user manual 1. The recommended distance of vga cable is 5 meters (maximum) without ghosting and degradation. Normally, the cable length is based on driver capacity of your vga card. If you need longer vga cable, please use vga extender to accomplish your app...

  • Page 28: 13. Faq

    7. If you forget the “password” of the switch (default is 00000000), please contact your supplier. 8. Cat.5 console receiver power led is not on, to make sure power adapter is connected to kvm cat.5 receiver. 9. No video signal is displayed on the remote monitor. ● please check all vga cables & conn...

  • Page 29: Kvm

    Rev. : 1.0 p.27 14. Technical specifications kvm local console cat.5 remote console pc port 16 n/a pc port interface hddb 15 pin n/a ps/2 keyboard: mini din 6 pin female ps/2 mouse: mini din 6 pin female vga : hddb 15pin female ps/2 keyboard: mini din 6 pin female ps/2 mouse: mini din 6 pin female v...

  • Page 30: Lcd

    Item lcd screen manufacturer lcd origin panel 15 ” tft 17 ” tft resolution 1,024 x 768 1,280 x 1,024 brightness 300 cd/m2 350 cd/m2 color 16.2 million 16.2 million contrast ratio 450:1 350:1 viewing angle 140 ° x 125° 140 ° x 120° display area 304 x 228 mm 337 x 270 mm pixel pitch 0.297 mm 0.264 mm ...