I-Trac MT-1 User Manual - page 4
Command : 669+ user password
Eg: 6690000
Command: Reply : When the tracker receive the command, tracker will send a Google link to the
sender
6. Command Get Daily report:
Command : 665+ user password+HHMM
Example:66500001022
Reply:SET DAILY REPORT OK
Note: HH stands for hour with defined range of [00, 23]. MM stands for minute with defined
range of [00, 59].
Close daily report function: 665+password+OFF(Default)
Example:6650000OFF
Reply:SET DAILY REPORT OFF
7. Geo- Fence
Turn On Geo-fence
Command: 211+ password
Eg: 2110000
Reply: GEO-FENCE ON
Set Geo Fence Command: 005+user password+Rzzz.z
E.g: 0050000R1.0 (1000M)
Reply: GEOFENCE ON
Turn geo-fence off
Command: 210+ password
Eg: 2100000
Reply: GEO-FENCE OFF
8. Battery low voltage alert
While device detect internal battery is low power, it will send coordinate message with
STATE:LOW P OWER
9 .Alert while power off
Open the power off alert Command: 011 + user password
eg: 0110000
Reply: POWER ALARM ON
Close the power off alert Command: 010 + user password
eg: 0100000
Reply: POWER ALARM OFF
10. Mileage Statistics(Software Support)
Set initial mileage value (zero clearing)
Command: 142+PW<+M+X>
Eg : 1420000
Reply : MILEAGE STATISTICS RESET OK