I.Trek M5+ User Manual

Summary of M5+

  • Page 1

    Bluetooth gps receiver user manual copyright 2007, www.Itrekgps.Com.

  • Page 2

    Introduction thank you for purchasing the bluetooth gps receiver, i.Trek m5 + , a gps receiver with bluetooth wireless technology. I.Trek m5 + is well suited for pda, smart phone, tablet pc and notebook pc with bluetooth capability. It can be used for a wide variety of applications such as in-car na...

  • Page 3

    Gps receiver bluetooth led solid blue – no connection to bluetooth device. Flashing slowly – sleeping mode (flashing every 5 seconds). Flashing quickly – connected to other bluetooth device (flashing very 2 seconds). Gps led solid orange – the gps is searching for satellites. Flashing orange – the g...

  • Page 4

    Pairing your bluetooth gps to a pda the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Pocket pc wm2003/wm2003se * make sure bluetooth is enabled on the pocket pc. 1. Open...

  • Page 5

    Pairing your bluetooth gps to a smartphone the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows mobile 2003 smartphone configure bluetooth serial com port • turn on ...

  • Page 6

    Pairing your bluetooth gps to a laptop the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows with xp bluetooth manager 1. Open control panel . 2. Double click on blue...

  • Page 7

    Setting up your software every navigation software has different setup instruction. Please refer to the user manual of each respective program for detail setup information. Below are some useful tips. Protocol the default protocol on i.Trek m5 + bluetooth gps is nmea and majority of the navigation s...

  • Page 8

    Technical specifications antenna receiver frequency: 1575.42 mhz (l1 band) c/a code antenna type: built-in active antenna gps receiver technology: mtk mt3301 + mt3179 gps module, waas enabled satellite measure used: 32-channel parallel automatic selection tracking sensitivity: -158 dbm operating tem...