I.Trek M6 User Manual

Summary of M6

  • Page 1

    User manual copyright 2006-2007 www.Itrekgps.Com tm.

  • Page 2

    Introduction thank you for purchasing the bluetooth gps receiver, i.Trek m6, a global positioning system receiver with bluetooth wireless technology. With the latest 20 channels sirf star iii chipset, i.Trek m6 delivers excellent sensitivity at –159dbm. The built-in waas/egnos correction further imp...

  • Page 3

    Gps receiver bluetooth led solid blue – no connection to bluetooth device. Flashing blue – connected to other bluetooth device. Gps led solid red – the gps is searching for satellites. Flashing red – the gps position has fixed. Battery led flashing red – the battery is low and requires charge. Red –...

  • Page 4

    Pairing your bluetooth gps to a pda the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Pocket pc wm2003/wm2003se * make sure bluetooth is enabled on the pocket pc. 1. Open...

  • Page 5

    Pairing your bluetooth gps to a smartphone the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows mobile 2003 smartphone configure bluetooth serial com port • turn on ...

  • Page 6

    Pairing your bluetooth gps to a laptop the instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows with xp bluetooth manager 1. Open control panel . 2. Double click on blue...

  • Page 7

    Setting up your software every navigation software has different setup instruction. Please refer to the user manual of each respective program for detail setup information. Below are some useful tips. Protocol the default protocol on i.Trek m6 bluetooth gps is nmea and majority of the navigation sof...

  • Page 8

    Technical specifications antenna receiver frequency: 1575.42 mhz (l1 band) c/a code antenna type: built-in passive antenna gps receiver technology: sirf star iii, waas/egnos enabled satellite measure used: 20-channel parallel automatic selection tracking sensitivity: -159 dbm operating temperature: ...