I3 International Ax32V Series Quick Start Manual
Quick Start Guide
Network Vandal-Resistant Mini Dome
Ax32V Series
• Safety
1. This quick start guide is designed for users who have an adequate
knowledge of network cameras.
2. Do not touch the imaging surface of the sensor. Use a soft cloth moistened
with alcohol to clean the surface if it is touched accidentally.
3. Ensure the power supply voltage is correct for the particular variant of
camera before operation.
4. Do not attempt to service this camera yourself unless you are authorized
to do so. Opening the camera may expose you to electrocution or other
hazards. Refer all servicing to qualified personnel only.
5. For more details on installation and operation, please refer to the CD provided.
• Package Contents
- Camera x1
- Prined Quick Guide x1
- Power Supply x1 (Optional)
- Document CD x1
- Guide Pattern Sticker x1
- Mounting Screws x2
- Allen Key x1
- White color Anchors x2
• Concept of Network Camera
• Camera Installation
1. Adhere the guide sticker to the mounting surface. The marks on the sticker
indicate the placement of the screws. If necessary, pre-drill holes. If mounting on
a cement surface, insert plastic anchors into the holes.
2. Using the Allen key provided, undo the four screws and remove
the outer casing.
3. Fasten the camera to the mounting
surface using the holes in the base
board and two screws.
4. Loosen the lens screws.
5. Adjust the lens’s angle as desired. Tighten the lens screws.
Refasten the outer casing.
NOTE:
-The lens has been factory adjusted for an optimal image. Therefore, only adjust the
camera angle.
i³ iP-Pro Server
Crossover direct connection
LAN
VIA a Gigabit Switch
i³ iP-Pro Server
Connection type: 1
Connection type: 2