I3b261 colour camera user guide warning: before attempting to connect or operate this product, read these instructions carefully. Save this manual for future use. To avoid electrical shock and to preserve the product warranty, do not disassemble the camera. Refer servicing to qualified personnel onl...
1 precautions this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Thi...
2 grounding this camera must be grounded. Follow the wire colour code below: green/yellow - ground blue - neutral brown - positive dvr system connection basic system connection extended system connection to avoid the risk of electric shock, prevent power cables from touching..
3 6b 6a 1 2 3 4 5 7 8 9 notes of use location and function of parts 1. Lens mount (cs mount):for installation of cs mount lenses only. 2. Tripod stand: allows mounting the camera onto a camera tripod. 3. Exposure control: auto iris mode (two types of lens are appropriate for this function). - dc iri...
4 4. V-phase adjustment: when using two cameras or more, the image on the monitor may roll vertically when switching sources. This rolling can be minimized by adjusting this controller. 5. Dc iris level adjustment: use to compensate for the iris level of a dc-type auto-iris lens. Turn counterclockwi...
5 notes of use dip switch function description 1. Auto gain control (n-agc / s-agc) n-agc (normal): standard position, gain = 24db. S-agc (super): high-sensitivity position, gain = 30db. 2. Back light compensation (on / off) on: the blc function is on off: the blc function is off. 3. Sync system (l-...
6 8. Ir lamp (ir on / ir off) using switch to select on or off. The environment with extra ir lights may cause issues for the icr filter, which can be resolved by turning this function on. 9. Manual shutter control (pins 9~12) follow the table below to manually configure shutter speed with the dip s...
7 specifications camera signal system ntsc pal scanning system 2:1 interlace sync system internal / line lock scanning frequency (h) 15.734 khz 15.625 khz scanning frequency (v) 59.94 hz 50 hz day & night mode auto / manual / bw imaging area 4.9 mm x 3.7 mm image sensor pixim orca sensor with digita...
I³ international inc. 1.866.840.0004 www.I3international.Com canada 780 birchmount road, unit 16, scarborough, on, m1k 5h4 u.S.A. 440 lawrence bell drive, suite 16, williamsville ny, 14221.
