I3 International SW-570 User manual
i3-TRNG-SW570-QuickGuide.doc
Rev. 121029
SW-570
User’s Manual
5 Port with 10/100/1000M
Switch with 4 PoE+ Ports
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device
and pursuant to Part 15 of FCC Rules.
These limits are designed to provide a
reasonable protection against harmful
interference when the equipment is
operated in a commercial environment. This
equipment generates and radiates radio
frequency energy. If equipment is not
installed and used in accordance with the
user manual, it may cause interference in
which case, users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
SW-570 switch provides five (5)
10/100/1000M ports. SW-570 is designed
for easy installation and high performance:
ideal for the environment where the network
traffic and the number of users are
continuously increasing.
SW-570 switch features 4 PoE/PSE ports
and can be used to increase the number of
available network outlets. By using SW-570,
system designer will have an added flexibility
when selecting installation locations for their
network devices.
The compact desktop design is ideal for
small to medium workgroups. The SW-570
switch can be installed where space is
limited; moreover, it provides smooth
network migration and allows easy network
capacity upgrades.
Package Contents
Prior to installation, verify that your SW-570
package contains the following items:
•
One PoE+ Gigabit Ethernet Switch
•
One Power Adapter
•
One Power Cord
•
One Quick User Guide
Note: If any of these items are found missing or
damaged, please contact your local supplier for
a replacement.
Key Features
•
5 Port 10/100/1000M Nway (Auto-negotiation)
Switch with 4 PSE/PoE ports
•
4 Ports share a total 70W power. 30W max for
each of the four PSE/PoE ports.
•
Palm size with metal chassis
•
Auto-learn networking configurations
•
Auto-detect full/half-duplex modes for any port
•
Dedicated full-duplex 2000Mbps bandwidth
•
Store-and-Forward switching methods
•
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
•
Non-blocking & Non-head-of-line blocking full
wire speed forwarding
•
Auto-MDI/MDI-X function for any port
•
Smart plug & play
Front Panel (LEDs)
LED Indicators of SW-570:
5-port 10/100/1000M Switch with 4
PoE/PSE ports
LED Status
Description
ON
Power is on.
Power
OFF
Power is off.
ON
Port is used for
connection.
OFF No
connection.
100M or
1000M
LINK/ACT
Flashing
Transmitting/ Receiving
Data
ON
Port is linked to PoE
Power Device
PoE
OFF
No PoE Device is
connected
Rear Panel (Power)
Power is supplied by an external DC power
adapter.