1 quick start guide innovations at the speed of thought ® ©2011 i³ international inc. The contents of this user manual are protected under copyrights and computer program laws. 48016.
2 important safety instructions • read and keep the instructions for future reference • do not use near water. • clean only with a dry cloth. • do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. • do not install near any heat sources such as rad...
3 before installation • installation should be carried out only by qualified personnel and in accord- ance with any electrical regulations enforced at the time. • the dvr must be placed on a stable surface or mounted in an approved cabinet. • adequate ventilation must be provided, take care not to b...
4 key description function keys power turn on/off the system power display selects various display modes in live display and playback ptz/focus selects ptz mode in live display menu displays the setup menus search displays the search menu control keys channel selection buttons displays individual ch...
5 system configuration rear panel description a. Camera input : connect up to 16 camera inputs. B. Monitor : main bnc monitor. Spot out : bnc spot monitor. C. Audio inputs & outputs : up to 4 audio inputs and one audio output can be connected as necessary. D. Pal / ntsc : change camera input type. E...
6 system configure – remote control remote control description setting id on the remote control: press the id button. This displays the input id dialog. Press the set id and press the return button (the default id is 01). To return to the previous display, press the id button again. Input the 255 an...
7 connect & power on • connect up to 16 camera inputs as necessary. • connect monitors to the dvr using the composite or dvi connections • connect power to the dvr. The dvr checks for proper power connection and emits two beeps on startup. • press the power button on the front panel of the dvr to be...
