I3TOUCH P5510 User Manual - Unboxing
– User Manual | 7
Unboxing
Remove packaging materials
The i3TOUCH is always packed on a pallet, combined with packing lint. Move the box
to an open location before you remove the packing lint around the box. You cannot
move the box anymore when these lints are cut.
Be careful not to damage the product when you open the packaging with sharp tools.
Open the box
Use the openings in the box to lift and remove the top of the box.
Unpack the smaller contents of the box. Check the table
below and verify if all accessories are included in the box.
Remove the styrofoam and plastic bag from the product.
Storage
Store the packaging of the i3TOUCH in a dry location, so that the packaging can be used to move or relocate the
product in the future.
Verify contents
i3TOUCH display
*
Power Cord
USB cable 3m
HDMI cable 3m
*
Remote control + batteries
Stylus holder
Stylus x2
Wi-Fi USB dongle
User Manual
Screws
* Components may differ in different locations.