IA Technologies IAT- Car DVR 1 User manual

Manual is about: Integrated in a Rearview Mirror with 2.4” LCD Monitor, GPS Logger, and Bluetooth Hands-Free Car Kit

Summary of IAT- Car DVR 1

  • Page 1

    1 edition 1st edition copyright this publication contains information that is protected by copyright. No part of it may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without permission from the copyright holders. Copyright © 2 all rights reser...

  • Page 2

    2 table of contents 1. Checking the packing list 2. Features 3. Specification 4. Identifying parts 5. Installation 6. Operation -dvr -booth tooth 7. Gps, g-sensor 8. Led status indicator 9. Troubleshooting 10. Safety precautions checking the packing list copyright © iat101 webpage: www.Iat101.Com ww...

  • Page 3

    3 features: 1. Built-in 2.4” tft lcd monitor, which can play video files. 2. Built-in wide angle camera (140 degree diagonal). 3. As vehicle engine starts; automatically loop recording. 4. Easy installation rear view mirror.. 5. Support sd/sdhc card up to 8 gb. 6. Synchronized video/audio recording....

  • Page 4

    4 bluetooth hand-free bluetooth version: v1.2, class 2 (qdid: b014086) effective distance: 10 m pairing: up to 7 slaves forms of support: headset and hand-free frequency: 2.4 ghz unlicensed ism band microphone: built- in identifying parts 1. Power cord (with led indicator) 2. 300mm anti-glare mirror...

  • Page 5

    5 installation 1. As shown in figure 1, fix this product on the original rear view mirror.. Figure 1 2. As shown in figure 2, adjust the position of this product, so that the original car rearview mirror would not block the lens of this product. Figure 2 3. As shown in figure 3, plug the power cord ...

  • Page 6

    6 operation step 1. Plug the power connector into the cigarette lighter to start the car (red led and green led always on) step 2. Insert sd card into dvr step 3. Turn on lcd monitor (this step can be skipped) step 4. Enter the boot mode, start recording in 10 seconds (red off, green light blinks) s...

  • Page 7

    7 pressing , press to confirm, then back to main menu. Sensitivity select 6. Sensitivity by , press into it, adjust the sensitivity by pressing , press to confirm, then back to main menu. Exit select 7. Exit by , press to confirm, the screen will back into the preview or recording mode directly. Cop...

  • Page 8

    8 bluetooth hands-free car kit operation it's dangerous and illegal to hold a mobile phone during drive, the integrated bluetooth car kits will provide a safe and convenient solution as you driving power on/ off car starts, then hands-free go into standby mode, status led flashes once every 3 second...

  • Page 9

    9 gps, g-sensor installation put the gps on the top right of car windshield, as figure 4. Affix gps to the windshield. Gps action lcd will appear the earth icon, when gps positioned. Note : tinted window film may interfere with gps reception, don’t place gps attached to tinted window film. Led statu...

  • Page 10

    10 troubleshooting 1. If the lcd monitor appears , please insert the sd card into the sd slot. 2. If the lcd monitor appears , please follow the following steps to troubleshoot the problem. Step 1. Check whether sd card has been inserted. Step 2. Check if the sd card is locked. Step 3. Check if the ...