IAdea XDS-104 User Manual - page 5

3 

Wired connection (OPTIONAL): Attach the USB Ethernet Adapter accessory (sold separately; part no. 

IAD-ACC-ITM-0019) to media player’s USB port and connect a LAN cable to the adapter’s other end (RJ-

45 port). REBOOT player to initialize the adapter. 

Player IP address 

You will also need an IP address for the player on your network. This could be set automatically (DHCP) or manually 

(static IP): 

1) DHCP – automatically assign network IP address 

DHCP is enabled by default. You do not need to change the settings unless setting a static IP. 

2) Static – manually assign network IP address 

Clock and calendar settings 

Time and Time Zone must be set correctly for scheduled playback. 

Move the highlight to “Static IP” below, press 

“Space bar” on the keyboard to fill in the star (*) 

at the Static IP brackets, and press “Enter” on 

the keyboard to select . 

Proceed to configure an available static IP address. 

Please ask your network administrator for 

assistance if necessary 

Highlight “IP configuration” and press “Enter” on 

keyboard to  

« ‹ Prev2345678Next › »

Summary of XDS-104

• Page 1

  Xds-104 user’s manual.

• Page 2

  I contents 1. Introduction 1 features 1 package contents 1 physical ports and features 1 2. Configuring the xds-104 2 system connections 2 usb keyboard configuration menus 2 navigating the menus 2 connect the xds-104 to your network 2 clock and calendar settings 3 brightness and volume settings 4 se...

• Page 3: Introduction

  1 1. Introduction this document describes the hardware and software operations of the xds-104, system set up, and frequently asked questions. Features 10-inch widescreen lcd display and stereo speakers built-in wireless b/g network and optional usb ethernet adapter supports advanced device programmi...

• Page 4: Configuring The Xds-104

  2 2. Configuring the xds-104 system connections 1 attach the ac power adapter to power on the unit. The following progress bar will be displayed on your monitor: 2 player boot process takes approximately 90 seconds to complete. After boot up, the player will indicate that it is ready for content syn...

• Page 5

  3 wired connection (optional): attach the usb ethernet adapter accessory (sold separately; part no. Iad-acc-itm-0019) to media player’s usb port and connect a lan cable to the adapter’s other end (rj- 45 port). Reboot player to initialize the adapter. Player ip address you will also need an ip addre...

• Page 6

  4  set local time, then  set time zone. Daylight saving (dst) rules can be configured when you enter the set time zone submenu. Brightness and volume settings from the main menu, select output setting to enter the submenu. Setting a password to prevent your player settings from being modified, set...

• Page 7

  5 factory reset if you forget a system password you have set, you must reset the system to regain access to the player. System reset will re-initialize the system, clear passwords, and return settings to their default values. Perform the following: 1. Connect usb keyboard 2. Reboot the player and lo...

• Page 8: Content Management

  6 3. Content management please see the software set up instructions for your management system.

• Page 9: Working With Smil

  7 4. Working with smil the xds-104 uses open communications protocols for highly flexible content presentation and playback control. Smil- compliance means predictable results across multiple devices, and smil’s non-proprietary nature means that your investments are never obsolete. Introduction usin...

• Page 10: Technical Data

  8 5. Technical data specifications xds-104 display and sound 10.1” tft lcd wide aspect ratio 300 nits maximum brightness 800x480 native resolution built-in stereo speakers 2 wx2 video format support mpeg-1 or mpeg-4 asp (up to 2 mbps bitrate) recommended 16:9 video resolution: 640x360 or 720x400 ima...

• Page 11: Appendix: Faq

  9 6. Appendix: faq what is the maximum file size for a single video file? The maximum video file size for the xds-104 is 2gb. We recommend reserving a safety margin to avoid exceeding the limit (i.E. Limiting files to 1850mb). How do i manage the playback of contents? Playback on a schedule is one o...

• Page 12

  10 usually based on user’s knowledge and experience with the specific media player. First check the on screen message and stats reports. Bad play list and timing issues are two major causes of playback problems. To determine if the problem is caused by a bad play list, just delete the play list and ...

• Page 13: Iadea Limited Warranty

  11 iadea limited warranty for integrated display devices applicable to iadea product models: xds-104, xds-104 1. Iadea provides, unless extended through optional service programs, one (1) year of limited warranty on its applicable product models listed above. The applicable product must be purchased...