1. DL manuals
  2. IAI
  3. Security Camera
  4. GO-2401C-PGE
  5. User Manual

IAI GO-2401C-PGE User Manual

Manual is about: 2.35M Digital Progressive Scan Monochrome and Color Camera

Summary of GO-2401C-PGE

  • Page 1

    Thank you for purchasing this product. Be sure to read this manual before use. This manual includes important safety precautions and instructions on how to operate the unit. Be sure to read this manual to ensure proper operation, and store it safely for future use. © 2015 jai user manual go-2401m-pg...

  • Page 2: Contents

    Contents notice ............................................................................3 warranty .......................................................................3 certifications .................................................................3 warning .....................................

  • Page 3

    — 3 — notice the material contained in this manual consists of information that is proprietary to jai ltd., japan and may only be used by the purchasers of the product. Jai ltd., japan makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for d...

  • Page 4

    — 4 — go-5000m-pge supplement the following statement is related to the regulation on “ measures for the administration of the control of pollution by electronic information products “ , known as “ china rohs “. The table shows contained hazardous substances in this camera. Mark shows that the envir...

  • Page 5

    — 5 — go - 5 000c- p ge supplement the following statement is related to the regulation on “ measures for the administration of the control of pollution by electronic information products “ , known as “ china rohs “. The table shows contained hazardous substances in this camera. Mark shows that the ...

  • Page 6: Usage Precautions

    — 6 — notes on cable configurations the presence of lighting equipment and television receivers nearby may result in video and audio noise. In such cases, change the cable configurations or placement. Notes on lan cable connection secure the locking screws on the connector manually, and do not use a...

  • Page 7: Features

    — 7 — go-2401m-pge / go-2401c-pge features the go-2401m-pge/go-2401c-pge is an industrial progressive scan camera equipped with a 1/1.2-inch global shutter cmos image sensor with 2.35 effective megapixels (1936 × 1216). The unit is compact and lightweight in design and is equipped with gige vision v...

  • Page 8: Parts Identification

    — 8 — go-2401m-pge / go-2401c-pge connection example: external trigger ac adapter camera computer poe-compatible switching hub parts identification ② ③ ⑥ ④ ⑤ ① ⑦ 1 lens mount (c-mount) mount a c-mount lens, microscope adapter, etc. Here. Before mounting a lens, be sure to refer to “step 2: connectin...

  • Page 9

    — 9 — go-2401m-pge / go-2401c-pge 2 rj-45 connector connect a gigabit ethernet compatible lan cable (category 5e or higher, category 6 recommended) here. 1 2 3 4 5 6 7 8 pin no. Input/ output description 1 in/out mx1+ (da+) 2 in/out mx1– (da–) 3 in/out mx2+ (db+) 4 in/out mx3+ (dc+) 5 in/out mx3– (d...

  • Page 10

    — 10 — go-2401m-pge / go-2401c-pge 6 dc in / trigger in connector (6-pin round) connect the cable for a power supply (optional) or for dc in / trigger in here. 1 2 3 4 5 6 hr-10a-7r-6pb (73) (hirose electric or equivalent) pin no. Input/ output signal description 1 dc in +12 to +24 v 2 in opto in 1 ...

  • Page 11

    — 11 — go-2401m-pge / go-2401c-pge recommended external output circuit diagram (reference example) standard circuit diagram example 2sc6033 220bs 220bs 1ss40 0 180bs 100kbs tlp109(tpr,e) 1 3 4 5 6 hirose_6pin_no.5 hirose_6pin_no.3 or 4 out f rom camera user power2 +5v to +24v user side jai go series...

  • Page 12: Preparation

    — 12 — go-2401m-pge / go-2401c-pge preparation preparation process step 1 installing the software (first time only) install the software for configuring and controlling the camera (jai sdk) on the computer. Step 2 connecting devices connect the lens, lan cable, ac adapter, computer, and other device...

  • Page 13: Step 2: Connecting Devices

    — 13 — go-2401m-pge / go-2401c-pge v clear the [jai gige vision filter driver] checkbox, and save. Step 2: connecting devices connect the lens, lan cable, ac adapter, and other devices. Attach the lens in a clean environment to prevent dust from adhering to the unit. Camera body 2 direct connection ...

  • Page 14

    — 14 — go-2401m-pge / go-2401c-pge caution • the maximum performance of the camera may not be realized depending on the lens. • attaching a lens with a mount protrusion of 9.1 mm or longer may damage the lens or camera. Note the following formula can be used to estimate the focal length. Focal lengt...

  • Page 15

    — 15 — go-2401m-pge / go-2401c-pge step 3: verifying the camera’s network connection status when power is supplied to the camera while the necessary equipment is connected, the power / trigger led and act led at the rear of the camera light amber, and initialization of the camera starts. When initia...

  • Page 16

    — 16 — go-2401m-pge / go-2401c-pge configuring the output format configure the size, position, and pixel format of the images to be acquired. The factory settings are as follows. Change the settings as necessary. Factory default values item default value image format control width 1936 (pixels) heig...

  • Page 17

    — 17 — go-2401m-pge / go-2401c-pge example: when changing [pixel format] note direct entry of numerical and text values is possible for some setting items. Configuring exposure and external trigger settings configure settings related to exposure control methods and trigger control. The factory setti...

  • Page 18

    — 18 — go-2401m-pge / go-2401c-pge configure the settings by expanding [acquisition control] and configuring the following items. Caution settings can only be configured when image acquisition on the camera is stopped. If an item is grayed out and the setting cannot be changed, stop image acquisitio...

  • Page 19

    — 19 — go-2401m-pge / go-2401c-pge 4 set [trigger mode] to [on]. 5 if necessary, change the [trigger source], [trigger activation], and [exposure auto] settings. When controlling the exposure time using the pulse width of the trigger input signal configure the settings as follows. Item setting value...

  • Page 20

    — 20 — go-2401m-pge / go-2401c-pge control without external triggers when controlling the exposure time using specified exposure times configure the settings as follows. Item setting value / selectable range trigger selector (trigger operation) frame start trigger mode off exposure mode timed (contr...

  • Page 21

    — 21 — go-2401m-pge / go-2401c-pge adjusting the gain adjust the sensitivity via the analog gain (i.E., master gain). For details on gain control, see “gain control” (page 31) in the “main functions” section. ■ manual adjustment 1 expand [analog control], and set [gain auto] to [off]. ([off] is the ...

  • Page 22: Step 7: Saving The Settings

    — 22 — go-2401m-pge / go-2401c-pge adjusting the black level 1 expand [analog control], and select the black level you want to configure in [black level selector]. For the go-2401m-pge, only [digital all] (master black) can be configured. For the go-2401c-pge, [digital all] (master black), [digital ...

  • Page 23

    — 23 — go-2401m-pge / go-2401c-pge ■ to save user settings 1 stop image acquisition. 2 expand [user set control], and select the save destination ([user set1] to [user set3]) in [user set selector]. Note the factory default setting values are stored in [default] and cannot be overwritten. Caution se...

  • Page 24: Basic Function Matrix

    — 24 — go-2401m-pge / go-2401c-pge basic function matrix the combinations of settings for the basic functions that can be used together are as follows. Exposur e mode frame star t t rigger binning v er tical* 1 binning horizontal* 1 exposur e time roi balance white auto* 2 gain auto exposur e auto v...

  • Page 25: Main Functions

    — 25 — go-2401m-pge / go-2401c-pge main functions gpio (digital input/output settings) the camera is equipped with gpio (general-purpose input/output) functions for generating and using combinations of triggers and other necessary signals within the camera and of signals output from the camera to th...

  • Page 26

    — 26 — go-2401m-pge / go-2401c-pge acquisition control (image acquisition controls) perform operations and configure settings related to image acquisition in [acquisition control]. The following acquisition modes are available on the camera. Acquisition mode description single frame acquire a single...

  • Page 27: Exposure Mode

    — 27 — go-2401m-pge / go-2401c-pge ■ maximum frame rate period formula • during [continuous] mode: 1 / ((height_s + 40) ×hperiod) during [trigger mode]: 1 / (exposure time[sec] + (height_s + 40) × hperiod) • = 920 × 1000000 / (height_g × width_g × pack value) max. Frame rate (unit: fps) = min* 3 (, ...

  • Page 28: Trigger Control

    — 28 — go-2401m-pge / go-2401c-pge trigger control the camera allows the following controls to be performed via external trigger signals. Trigger selector description frame start start exposure in response to the external trigger signal input. Select this to perform exposure control using external t...

  • Page 29

    — 29 — go-2401m-pge / go-2401c-pge ■ when [exposure mode] is [trigger width] example: when [trigger source] is set to [line 5 - optical in 1] and [optin filter selector] is set to [10 µs] scanning range shortest period of trigger 8-/10-bit full 30.782 ms roi 2/3 (height = 810) 30.782 ms roi 1/2 (hei...

  • Page 30: Event Control

    — 30 — go-2401m-pge / go-2401c-pge * event control “event control” is a function that uses gvcp (gige vision control protocol) to output points of change in the camera’s internal signal as event occurrence information or “event messages.” when this information is output, the camera’s internal timest...

  • Page 31: Gain Control

    — 31 — go-2401m-pge / go-2401c-pge ■ to use the event control function configure the settings as follows. Item setting value / selectable range description event selector acquisition trigger, frame start, frame end, fval start, fval end, exposure start, exposure end, line2(opt out1) risingedge, line...

  • Page 32: Lut (Lookup Table)

    — 32 — go-2401m-pge / go-2401c-pge bayer color x89.12 x16 x7.15 x5.62 x1 x0.45 1600 0 37876 (x5.62) 0 (x1) –4533 (x0.45) r&b red blue 39db -7db 0db 24db 15db 0db –7db 15db 0db –7db 15db 37876 (x5.62) 0 (x1) –4533 (x0.45) gain setting value master master gain amplification gain setting value (scaling...

  • Page 33: Gamma Function

    — 33 — go-2401m-pge / go-2401c-pge 4095 index0 index1 lut value [1] lut value [0] index255 linear interpolation using data to the left and right is used to determine values between points. Gamma function the gamma function corrects the output signals from the camera beforehand (reverse correction), ...

  • Page 34: Line Status

    — 34 — go-2401m-pge / go-2401c-pge line status the line status function allows you to verify the status of external input/output signals. You can verify the status of the following signals. • opt out 1, opt out 2, opt in 1 • time stamp reset • nand gate 0 in 1, nand gate 0 in 2, nand gate 1 in 1, na...

  • Page 35: Binning Function

    — 35 — go-2401m-pge / go-2401c-pge within 30% of adjustment range ■ color shading (go-2401c-pge only) r-channel and b-channel properties are adjusted to using the g-channel shading properties as a reference. Pre-correction post-correction caution proper correction is not possible under the following...

  • Page 36

    — 36 — go-2401m-pge / go-2401c-pge roi (regional scanning function) the roi (region of interest) function allows you to output images by specifying the areas to scan. Roi settings specify the area to scan by specifying width, height, and horizontal/vertical offset values under [image format control]...

  • Page 37: Video Send Mode

    — 37 — go-2401m-pge / go-2401c-pge video send mode switch the video send mode to configure and operate multi roi, sequence trigger, and other jai custom control functions. Video send mode ■ to switch the video send mode select the video send mode in [video send mode selector]. [video send mode selec...

  • Page 38

    — 38 — go-2401m-pge / go-2401c-pge sensor frame memory 1 2 3 4 5 2 3 4 5 1 multiroi on mode specify an roi in the area scanned by sensor roi and output as a separate stream. ■ sequence trigger function the sequence trigger function lets you define up to 128 preset combinations of exposure time, gain...

  • Page 39

    — 39 — go-2401m-pge / go-2401c-pge [sequence repetition] this parameter applies to trigger sequence patterns which include an index whose [sequence roi next index] is set to off. When the index whose [sequence roi next index] is set to off is finished executing, the value of sequence repetition (ran...

  • Page 40

    — 40 — go-2401m-pge / go-2401c-pge changing the value of [command sequence index] to one of the other predefined indexes causes that index to be executed in response to subsequent triggers. This mode of operation enables users to develop applications that continually send new values to [command sequ...

  • Page 41

    — 41 — go-2401m-pge / go-2401c-pge delayed readout [acquisition transfer start] delayed readout enables images captured by a frame start trigger command to be stored inside the camera and read out on demand at a later time using acquisition transfer start trigger. This can be especially useful when ...

  • Page 42

    — 42 — go-2401m-pge / go-2401c-pge detailed settings for gain auto (automatic gain level control) when [gain auto] is set to [continuous], you can configure the conditions for automatic adjustment in detail. Item description alc reference specify the target level for automatic gain control. (this se...

  • Page 43

    — 43 — go-2401m-pge / go-2401c-pge counter and timer control function (counter support only) the counter function counts up change points in the camera’s internal signals using the camera’s internal counter, and reads that information from the host side. This function is useful for verifying error c...

  • Page 44: Video Process Bypass Mode

    — 44 — go-2401m-pge / go-2401c-pge ■ to use the counter function configure the settings as follows. Three counters can be configured (counter 0 to 2). Item setting value / selectable range description counter 0 to 2 counter 0 to 2 select the counter. Counter 0 to 2 event source off, frame trigger, f...

  • Page 45: Settings List

    — 45 — go-2401m-pge / go-2401c-pge settings list feature properties : settings that can only be configured when image acquisition on the camera is stopped. Item setting range default value description a) device control display/configure information related to the device. Device vendor name — — displ...

  • Page 46

    — 46 — go-2401m-pge / go-2401c-pge item setting range default value description c) acquisition control configure image acquisition settings. Acquisition mode single frame, multi frame, continuous continuous select the image acquisition mode. Acquisition start — — start image acquisition. Acquisition...

  • Page 47

    — 47 — go-2401m-pge / go-2401c-pge item setting range default value description black level selector go-2401m-pge: digital all go-2401c-pge: digital all, digital red, digital blue digital all (master black) select the black level to configure. Black level digital all: –133 to 255 digital red & blue:...

  • Page 48

    — 48 — go-2401m-pge / go-2401c-pge item setting range default value description pulse generator selector pulse generator 0 pulse generator 0 select the pulse generator. Pulse generator length 1 to 1048575 1 set the count-up value (clock value) for the pulse generator. Pulse generator length (ms) 1.3...

  • Page 49

    — 49 — go-2401m-pge / go-2401c-pge item setting range default value description interface selector — 0 set the interface. Mac address — xx-xx-xx-xx- xx-xx display the mac address. Supported lla — true display whether lla (link-local address) is supported. Supported dhcp — true display whether dhcp i...

  • Page 50

    — 50 — go-2401m-pge / go-2401c-pge item setting range default value description timestamp tick value — 0 display the timestamp value. Control channel privilege — controlaccess display the control channel privilege. Message channel port 0 to 65535 xxxxx set the port number for the message channel. Me...

  • Page 51

    — 51 — go-2401m-pge / go-2401c-pge item setting range default value description n) jai custom control shading configure shading correction settings. Shading correction mode go-2401m-pge: flat shading (fixed) go-2401c-pge: flat shading, color shading flat shading select the shading correction mode. S...

  • Page 52

    — 52 — go-2401m-pge / go-2401c-pge item setting range default value description p) jai custom control multiroi when using the jai multi roi function, set the scanning area. Multi roi index index 1 to 5 index 1 set the multi roi index table. Multi roi width 16 to 1936/16 steps 1936 set the width. Whe...

  • Page 53: Settings

    — 53 — go-2401m-pge / go-2401c-pge settings for details on the setting items, refer to the jai control tool user’s guide item setting range default value 32-bit factory transport layers available 32-bit transport layers — jai_gige_vision — transport name — jai_gige_vision full path to cti file — $(j...

  • Page 54

    — 54 — go-2401m-pge / go-2401c-pge item setting range default value support email address — camerasupport@jai.Com logging properties enable logging true, false false use custom properties file true, false false custom logging properties file path output log file path enable genapi logging true, fals...

  • Page 55: Miscellaneous

    — 55 — go-2401m-pge / go-2401c-pge miscellaneous updates you can obtain update information and the latest update information from the following url. Http://www.Jai.Com/en/partner/camerainformation/pages/revision_notes.Aspx registration and login are required for viewing. Check the version of the uni...

  • Page 56: Specifications

    — 56 — go-2401m-pge / go-2401c-pge specifications item go-2401m-pge go-2401c-pge scanning system progressive scan, 1 tap synchronization internal interface 1000base-t ethernet (gige vision 1.1), ieee 802.3af image sensor 1/1.2-inch monochrome cmos 1/1.2-inch bayer color cmos image size (effective im...

  • Page 57

    — 57 — go-2401m-pge / go-2401c-pge item go-2401m-pge go-2401c-pge black level adjustment default level 33lsb (during 10-bit output) video level adjustment range 0 to 100 (during 10-bit output) adjustment range –33lsb to +64lsb against reference level (during 10-bit output) resolution adjustment 1 st...

  • Page 58: Frame Rate Reference

    — 58 — go-2401m-pge / go-2401c-pge frame rate reference (theoretical value: decimal values are dropped, during unpacked) pixel count resolution (screen size) roi/binning pixel size(μm) image size frame rate 2.35 mp 1936 × 1216 full pixel 5.86 × 5.86 1/1.2" (13.40 mm) 32.8 fps (@8 bit) 2 mp 1920 × 10...

  • Page 59: Dimensions

    — 59 — go-2401m-pge / go-2401c-pge go-2401c-pge 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 400 500 600 700 800 900 1000 se ns it iv it y wave length (nm) rch gch bch dimensions 12 20 10 41.5 12.5 23.7 14 22 29 29 c mount 4-m2 depth3 3-m3 depth3 20 dimensional tolerance: ±0.3 mm unit: mm.

  • Page 60: User’S Record

    — 60 — go-2401m-pge / go-2401c-pge user’s record camera type: go-2401m-pge / go-2401c-pge revision: …………….. Serial no. …………….. Firmware version. …………….. For camera revision history, please contact your local jai distributor. Trademarks • gige vision is a registered trademark of aia (automated imagin...

  • Page 61: Index

    — 61 — go-2401m-pge / go-2401c-pge 6-pin round 10 a ac adapter 14 acquisition control 26 acquisition modes 26 act led 9 adjusting the black level 22 adjusting the gain 21 adjusting the white balance 21 alc 41 automatic level control function 41 b black level 22 c camera locking screw holes 11 c-moun...