IBaby M3s User Manual - page 8
8
8
d.
Login to your router, and check your Wi-Fi settings (e.g.Netgear).
Check SSID (Wireless Network Name/SSID cannot contain any symbols, characters
or spaces. ONLY numbers, letters, and -).
For Security Mode, select WPA/WPA2.
Change the Wi-Fi channel to reduce signal interference.
Cancel MAC address filter on router.
4.5 iBaby monitor connects to Wi-Fi but has an unstable connection
a.
Place the monitor within 75 feet of your wireless router to ensure a strong Wi-Fi signal.
b.
Reboot the router by unplugging the power adapter from the wall outlet for 10 seconds.
Once the router is powered on, wait for all indicating lights and symbols on the router
to turn on. Proceed to setup the monitor
c.
If the above solutions do not solve the problem, please contact Customer Service at
support@ibabylabs.com
4.6
Audio is enabled but I cannot hear my baby.
1)
Increase the volume on your mobile device.
2)
For the best sound transmission, place the monitor within 5 feet of the baby.