Quick installation guide 4g/3g mimo wireless-n router model no.: ib-w4g311n ver.: 2.0.0
2 overview quick installation guide will help you to configure iball baton ib-w4g311n 4g/3g mimo wireless-n router quickly & easily. For detailed instructions, please refer to the user guide on website www.Iball.Co.In. 1. Introduction iball baton 4g/3g mimo wireless-n router (ib-w4g311n) is high per...
3 1.1 package list the following contents should be found in the product packaging: 4g/3g mimo wireless-n router 2 x 5dbi antenna (fixed) 2 x rj11 patch cord rj45 patch cord quick installation guide 1.2 rear panel and description.
4 2. Hardware connection 2.1.1 broadband connection 1) connect the lan port of router to your pc with rj45 ethernet cable. 2) connect the isp rj45 cable (internet link) to lan/wan port 3) connect the power adapter to power interface of the device..
5 2.1.2 4g/3g/2g wan connection 1) plug the 4g/3g/2g usb modem (data card) into the router usb slot 2) configure the 4g connection in the router as per your isp settings connection available. Note: check the sim card is inserted properly in usb modem before inserting into the router.
6 led indicators interface description on/off power switch, power on or power off the device. Power power interface, for connecting to the power adapter. Wlan/ wps press the button and hold it for 1 second to 5 seconds, to enable wlan. Press the button and hold it for more than 5 seconds, to enable ...
3 web configuration 2.1 network configuration on pc take windows as an example. 1) click start > control panel > network and internet > network and sharing centre. 2) change adapter settings > local area connection. Right-click local area connection and choose properties. 3) double-click internet pr...
8 3.2 status device information router status page will shown the following figure. In this page, click quick start or network setup menu to configure wan configuration as your isp link..
9 3.3 quick start quick start page will guide you for fast and quick configuration of the broadband internet connection. Note: 4g / 3g configuration can be configured only through network setup menu. 1) broadband wan connection setting in following page, enter pppoe / dynamic ip / static ip settings...
10 2) 4g/3g/2g wan connection setting 4g/3g/2g network settings, click router menu network setup in following page, you can manually need to configure the gsm / cdma data card card isp as provided by your internet service provider (isp). Insert 4g/3g enable sim in the dongle and insert data card in ...
11 3) wireless settings in following page, you can select wireless mode, set ssid and encryption. For wireless security, it is recommended to set the encryption mode to wpa2, and then enter a password. 5) save settings if you want to finish setting, click save. Otherwise click cancel. Figure 1.
12 note: compatability of various data cards (indian brand / other brand) with the iball baton router are based on the tests conducted by iball team in india. (data card id’s is subject to change in chipset / hardware version made by respective manufacturer) new data cards / usb modems available in ...
