1. DL manuals
  2. IBall Baton
  3. Network Router
  4. iB-WR7011A
  5. User Manual

IBall Baton iB-WR7011A User Manual

Manual is about: 150M 1-Port Wi-Fi ADSL2+ Router

Summary of iB-WR7011A

  • Page 1

    150m 1-port wi-fi adsl2+ router model no. Ib-wr7011a user guide ver. 1.0.0

  • Page 2: Fcc Statement

    Fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

  • Page 3: Contents

    Contents package contents..................................................................................................... 1 chapter 1. Introduction.......................................................................................... 2 1.1 product overview .....................................

  • Page 4

    4.5 access management ........................................................................... 50 4.5.1 acl.............................................................................................................51 4.5.2 filter.....................................................................

  • Page 5: Package Contents

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 1 package contents the following contents should be found in your package:  150m 1-port wi-fi adsl2+ router  power adapter  quick installation guide  rj45 cable  rj11 cables  adsl splitter  one resource cd, which includes this user guide n...

  • Page 6: Chapter 1. Introduction

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 2 chapter 1. Introduction thank you for choosing the iball baton ib-wr7011a 150m 1-port wi-fi adsl2+ router 1.1 product overview the device is designed to provide a simple and cost-effective adsl internet connection for a wired ethernet or wirele...

  • Page 7

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 3 1.2 main features complies with iee802.3 & ieee802.3u standards complies ieee 802.11n wireless technology to provide a wireless data rate of up to 150mbps  3-in-1: one rj11(internet) line port, four 10/100m auto-negotiation (rj45) ethernet por...

  • Page 8

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 4 chapter 2. Hardware installation 2.1 the front panel figure 2-1 the leds locate on the front panel. They indicate the device’s working status. Led explanation: name status indication pwr on ( red colour) device init on ( green colour) device in...

  • Page 9

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 5 2.2 the back panel figure 2-2  dsl: through the port, you can connect the router with the telephone. Or you can connect them by an external separate splitter. For details, please refer to 2.4.  wi-fi: press this button for short time, used to...

  • Page 10

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 6 2.4 connecting the router before installing the device, please make sure your broadband service provided by your isp is available. If there is any problem, please contact your isp. Before cable connection, cut off the power supply and keep your...

  • Page 11

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 7 figure 2-3.

  • Page 12

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 8 chapter 3. Quick installation guide 3.1 configure pc after you directly connect your pc to the ib-wr7011a or connect your adapter to a hub/switch which has connected to the router, you need to configure your pc’s ip address. Follow the steps be...

  • Page 13

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 9 figure 3-2 step 3: select general tab, highlight internet protocol (tcp/ip), and then click the properties button. Figure 3-3.

  • Page 14

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 10 step 4: configure the ip address as figure 3-4 shows. After that, click ok. Figure 3-4 note: you can c onfigure the pc to get an ip address automatically, select “obtain an ip address automatically” and “obtain dns server address automatically...

  • Page 15

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 11 figure 3-5 if the result displayed is similar to the screen shown below, it means that your pc has not connected to the router. Figure 3-6 you can check it follow the steps below: 1) is the connection between your pc and the router correct? Th...

  • Page 16

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 12 figure 3-7 step 1: select the quick start tab, then click run wizard, and you will see the next screen. Click the next button. Figure 3-8 step 2: configure the time for the router, and then click the next button. Figure 3-9 step 3: select the ...

  • Page 17

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 13 figure 3-10 step 4: configure the following options provided by your isp: username, password, vpi, vci and connection type. Then click next. Figure 3-11 step 5: configure the rules for the wlan, and click next. Figure 3-12.

  • Page 18

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 14 note: if the access point is activated, the wireless function will be available even without the external antenna because of an additional printed antenna. To adopt the wireless security protection measures, please refer to section 4.3.3 . Ste...

  • Page 19

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 15 chapter 4. Software configuration this user guide recommends using the “quick installation guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you w...

  • Page 20

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 16 figure 4-2 note: click the other submenus system log or statistics in figure 4-2, and you will be able to view the system log and traffic statistics about the router..

  • Page 21

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 17 4.1.2 system log choose “status→ system log” menu, and you will be able to query the logs of the router. Figure 4-3 the router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the clear log button...

  • Page 22

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 18 figure 4-4  interface: you can select ethernet, adsl and wlan to view the corresponding network traffic over different ports.  select ethernet, and youwillsee the statistics table as below. Statistics table: transmit statistics transmit fram...

  • Page 23

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 19  select adsl, and youwillsee the statistics table as below. Statistics table: transmit statistics transmit total pdus the total pdus transmitted over the adsl port. Transmit total error counts the total errors occurred over the adsl port when...

  • Page 24

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 20 4.2 quick start please refer to " 3.2 login" . 4.3 network setup choose “network setup”, you can see the next submenus: wan, lan and wireless. Figure 4-5 click any of them, and you will be able to configure the corresponding function. 4.3.1 wa...

  • Page 25

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 21 figure 4-6.

  • Page 26

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 22  atm vc: atm settings are used to connect to your isp. Your isp provides vpi (virtual path identifier), vci (virtual channel identifier) settings to you. In this device, you can totally setup 8 vcs on different encapsulations, if you apply 8 ...

  • Page 27

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 23 figure 4-7  encapsulation: select the encapsulation mode for the dynamic ip address, you can leave it default.  nat: select this option to enable/disable the nat (network address translation) function for this vc. The nat function can be act...

  • Page 28

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 24 2) static ip address select this option if your isp provides static ip information to you. You should set static ip address, ip subnet mask, and gateway address in the screen below (shown in figure 4-8). Figure 4-8 note: each ip address entere...

  • Page 29

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 25 figure 4-9  service name: enter a name to mark current connection, or you can leave it blank.  username: enter your username for your pppoe/pppoa connection.  password: enter your password for your pppoe/pppoa connection.  encapsulation: f...

  • Page 30

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 26  static/dynamic ip address: for pppoe/pppoa connection, you need to specify the public ip address for this adsl router. The ip address can be either dynamically (via dhcp) or given ip address provided by your isp. For static ip, you need to s...

  • Page 31

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 27 figure 4-11  router local ip: these are the ip settings of the lan interface for the device. These settings may be referred to as private settings. You may change the lan ip address if needed. The lan ip address is private to your internal ne...

  • Page 32

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 28 multicast: select igmp version, or disable the function. Igmp (internet group multicast protocol) is a session-layer protocol used to establish membership in a multicast group. The adsl atu-r supports both igmp version 1 (igmp v1) and igmp v2....

  • Page 33

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 29 dns relay: if you want to disable this feature, you just need to set both primary and secondary dns ip to 0.0.0.0. If you want to use dns relay, you can setup dns server ip to 192.168.1.1 on their computer. If not, the device will perform as n...

  • Page 34

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 30 4.3.3 wireless choose “network setup→ wireless” menu, and you will see the wireless screen (shown in figure 4-14 ). Please configure the parameters for wireless according to the descriptions below..

  • Page 35

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 31 figure 4-14  access point settings: these are the settings of the access point. You can configure the rules to allow wireless-equipped computers and other devices to communicate with a wireless network. Access point: select activated to allow...

  • Page 36

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 32 channel bandwidth: select the bandwidth you want to use from the drop-down list. There are two options, “20 mhz” and “20/40 mhz”. If bigger bandwidth is selected, device could transmit and receive data with higher speed. Extension channel: if ...

  • Page 37

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 33 1) wep-64bits to configure wpa-64bits settings, select the wpa-64bits option from the drop-down list. The menu will change to offer the appropriate settings. Wpa-64bits is a data privacy mechanism based on a 64-bit shared key algorithm, as des...

  • Page 38

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 34 figure 4-18  encryption: select the encryption you want to use: tkip/aes, tkip or aes (aes is an encryption method stronger than tkip).  tkip (temporal key integrity protocol) - a wireless encryption protocol that provides dynamic encryption...

  • Page 39

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 35 figure 4-20  wps settings: wps can help you to add a new wireless device to an existing network quickly. This section will guide you how to use wps function. Wps state: display the current wps state. Wps mode: if the wireless adapter supports...

  • Page 40

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 36 the wps configuration screen of wireless adapter 2) pin code if the wireless adapter supports wi-fi protected setup and the pin method, you can add it to the network by pin with the following two methods. Click pin code, you will see the scree...

  • Page 41

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 37 the wps configuration screen of wireless adapter step 2: for the router, keep pin code selected and enter the pin code of the wireless adapter in the field after enrollee pin code as shown below. Then click start wps. Figure 4-23 method two: e...

  • Page 42

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 38 the wps configuration screen of wireless adapter note: the default pin code of the router can be found in its label or the wps configuration screen as figure 4-23.  wps/wlan: wps/wlan button can be used to enable and disable wireless feature....

  • Page 43

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 39  wds settings: select on/off to enable/disable wds. With this function enabled, the router can bridge two or more wlans. Mac address: enter the mac address you wish to bridge in the field.  wireless mac address filter: wireless access can be...

  • Page 44

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 40 4.4 advanced setup choose “advanced setup”, you can see the next submenus: figure 4-24 click any of them, and you will be able to configure the corresponding function. 4.4.1 firewall choose “advanced setup→ firewall” menu, and you will see the...

  • Page 45

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 41 4.4.2 routing choose “advanced setup→ routing” menu, and you will see the routing information in the next screen (shown in figure 4-26). Figure 4-26 click add route button to add a new route in the next screen (shown in figure 4-27). Figure 4-...

  • Page 46

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 42 4.4.3 nat choose “advanced setup→ nat” menu, you can setup the nat (network address translation) function for the router (shown in figure 4-28). Figure 4-28  virtual circuit: enter virtual circuit index that you plan to setup for the nat func...

  • Page 47

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 43 4.4.3.2. Virtual server choose “advanced setup→ nat→ virtual server” in figure 4-28, you can configure the virtual server in the next screen. The virtual server is the server or server(s) behind nat (on the lan), for example, web server or ftp...

  • Page 48

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 44 address for the virtual server; if the application list does not contain the service that you want, please configure the port number, ip address and protocol manually. Step 4: after that, click save to make the entry take effect. Other operati...

  • Page 49

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 45 to add a mapping rule: step 1: select the “virtual circuit” and multiple for the “number of ips”. Then select the tab ip address mapping (shown in figure 4-28). Note: ip address mapping is only available for vcs with multiple ips. Step 2: sele...

  • Page 50

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 46 figure 4-32  qos: select this option to activate/deactivate the ip qos on different types (ip tos and diffserv).  summary: click the button to view the configurations of qos.  rule: configure the rules for qos. If the traffic complies with ...

  • Page 51

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 47 destination host for the rule. Source mac & ip & mask & port range: enter the ip information about the source host for the rule. Protocol id: select one among tcp/udp, tcp, udp or icmp protocols for the application. Vlan id range: enter the vl...

  • Page 52

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 48 can communicate as if they were attached to the same lan, when in fact they are located on a number of different lan segments. Because vlans are based on logical instead of physical connections, it is very flexible for user/host management, ba...

  • Page 53

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 49 2) define vlan group click define vlan group in figure 4-33, you can define vlan groups in the next screen (shown in figure 4-35). Figure 4-35  vlan index: select the vlan index for this vc. You can specify 8 groups in maximum.  vlan id: thi...

  • Page 54

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 50 4.4.6 adsl choose “advanced setup→ adsl”, you can select the adsl type and adsl mode in the next screen. The adsl feature can be selected when you meet the physical connection problem. Please check the proper settings with your internet servic...

  • Page 55

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 51 4.5.1 acl choose “access management→ acl”, you can specify the client to access the adsl router once setting his ip as a secure ip address through selected applications. Figure 4-38  acl: if activated, the ip addresses which are contained in ...

  • Page 56

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 52 4.5.2.1. Ip filter select ip/mac filter as the filter type, and select ip as the rule type (shown in figure 4-39), then you can configure the filter rules based on ip address. The filtering includes outgoing and incoming, the detailed descript...

  • Page 57

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 53  direction: select the direction for this ip filter rule. There are three filtering directions: both, incoming, outgoing. Note: incoming means that ip traffic which is coming into the router, and the outgoing means that ip traffic which is go...

  • Page 58

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 54 step 1: select the “ip/mac filter” as the filter type selection (show in figure 4-39). Select the “ip” as the rule type on the filter screen, then you can configure the specific rule for the example. Step 2: select the ip/mac filter set index ...

  • Page 59

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 55 note: after you complete the ip filter rules for the example, the filter list will show as follows. You can enter the ip / mac filter set index to view the information about the rule. Other operations for the entries as shown in figure 4-39: s...

  • Page 60

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 56  active: select “yes” to make the rule to take effect.  mac address: enter the mac address for the rule.  rule unmatched: if the current rule can not match, and you select forward, the router will skip the rule and transmit directly.If you ...

  • Page 61

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 57 00-0a-eb-00-07-5f to access the internet. Note: after you complete the mac filter rules for the example, the filter list will show as follows. You can enter the ip / mac filter set index to view the information about the rule. Other operations...

  • Page 62

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 58 4.5.2.4. Url select application filter as the filter type (shown in figure 4-42), and then you can configure the filter rules based on url. Figure 4-42  filter type selection: select the url filter for the next configuration.  active: select...

  • Page 63

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 59 step 1: select the “url filter” as the filter type selection (show in figure 4-42). Step 2: select the index for the rule, and then enter the website in the url field. Step 3: select start and end local ip address to block ip address range ste...

  • Page 64

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 60 figure 4-44  upnp: activate or deactivate the upnp function. Only when the function is activated, can the upnp take effect.  auto-configure: if you activate the function, then the upnp network devices can automatically configure network addr...

  • Page 65

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 61  e-mail address: enter your e-mail address here.  username & password: type the “user name” and “password” for your ddns account.  wildcard support: select the option to use wildcard function 4.5.6 cwmp choose “access management→ cwmp”, you...

  • Page 66

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 62 4.6 maintenance choose “maintenance”, you can see the next submenus: figure 4-47 click any of them, and you will be able to configure the corresponding function. 4.6.1 administration choose “maintenance→ administration”, you can set new passwo...

  • Page 67

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 63 select ntp server automatically as the synchronize time, you only need to set the time zone. Figure 4-49 note: the adsl router built-in some ntp servers, when the router connects to the internet, the router will get the system time automatical...

  • Page 68

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 64 select manually as the synchronize time, you need to set the date and time corresponding to the current time. Figure 4-51 4.6.3 firmware choose “maintenance→ firmware”, you can upgrade the firmware of the router in the screen (shown in figure ...

  • Page 69

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 65 to upgrade the router's firmware, follow these instructions below: step 1: type the path and file name of the update file into the “new firmware location” field. Or click the browse button to locate the update file. Step 2: click the upgrade b...

  • Page 70

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 66 figure 4-54 to restore the router’s settings: step 1: click the browse button to locate the update file for the device, or enter the exact path in “new romfile location” field. Step 2: click the upgrade button to complete. 4.6.4 sysrestart cho...

  • Page 71

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 67 4.6.5 diagnostics choose “maintenance→ diagnostics”, you can view the test results for the connectivity of the physical layer and protocol layer for both lan and wan sides in the screen (shown in figure 4-56). Figure 4-56.

  • Page 72

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 68 4.7 help choose “help”, you can view the help information for configuration of any function. Figure 4-57 note: click the tab, and you will be able to get the corresponding information..

  • Page 73: Appendix A: Specifications

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 69 appendix a: specifications general standards complies with ieee 802.11b, ieee 802.11g, ieee 802.11n & ieee 802.3, ieee 802.3u standards protocols ansi t1.413, itu g.992.1, itu g.992.2, itu g.992.3, itu g.992.5, protocols tcp/ip, pppoa, pppoe, ...

  • Page 74

    Ib-wr7011a 150m 1-port wi-fi adsl2+ router user guide 70 54m: -68dbm@10% per 11m: -85dbm@8% per; 6m: -88dbm@10% per 1m: -90dbm@8% per physical and environment working temperature 0 ~ 40 ℃ ℃ working humidity 10% ~ 90% rh (non-condensing) storage temperature -40 ~ 70 ℃ ℃ storage humidity 5% ~ 90% rh (...